MIRA Safety Gas Mask Microphone (CM-6M, CM-7M, CM-8M, & TAPR)
MIRA Safety Gas Mask Microphone (CM-6M, CM-7M, CM-8M, & TAPR)
MIRA Safety Gas Mask Microphone (CM-6M, CM-7M, CM-8M, & TAPR)
MIRA Safety Gas Mask Microphone (CM-6M, CM-7M, CM-8M, & TAPR)
MIRA Safety Gas Mask Microphone (CM-6M, CM-7M, CM-8M, & TAPR)
MIRA Safety Gas Mask Microphone (CM-6M, CM-7M, CM-8M, & TAPR)
MIRA Safety Gas Mask Microphone (CM-6M, CM-7M, CM-8M, & TAPR)
MIRA Safety Gas Mask Microphone (CM-6M, CM-7M, CM-8M, & TAPR)
MIRA Safety Gas Mask Microphone (CM-6M, CM-7M, CM-8M, & TAPR)
MIRA Safety Gas Mask Microphone (CM-6M, CM-7M, CM-8M, & TAPR)
MIRA Safety Gas Mask Microphone (CM-6M, CM-7M, CM-8M, & TAPR)

MIRA Safety Gas Mask Microphone (CM-6M, CM-7M, CM-8M, & TAPR)

Regular price $149.95 Save $-149.95
0 in stock

Get crystal clear communication in any environment with the MIRA Safety Gas Mask Microphone. It’s engineered to replace the existing exhalation valve cover of your MIRA Safety gas mask, an upgrade that can be installed in seconds without tools. This microphone offers integrated noise-canceling functionality with no additional power needed.   

Key Benefits of MIRA Safety Gas Mask Microphone

  • Noise-canceling, dynamic, moving-coil microphone in a tough polymer housing
  • Available in a 2-pin NEXUS U-173/U connector for compatibility with Peltor and Ops-Core headsets, or 3.5mm version which is compatible with the VPU-1
  • Replaces your existing gas mask exhalation valve cover for quick and easy installation (no expert installation needed)
  • Heavy-duty polymer construction with durable retaining ring
  • Serviceable, with parts available in case of damage
  • Optimized for all-weather use (-33°C to +77°C) in any environment
  • Pivoting cable allows for easy ambidextrous alignment
  • Engineered to meet MIL-STD-461G and MIL-STD-810G
  • Provides an average of over 30,000 hours of use
  • IP67-rated for protection against dust, water, and oil
  • Can be fully submerged in up to 3 feet of water for ½ hour (not recommended)
  • Weighs less than two ounces (2 oz.), including the cable
  • Made in the Czech Republic 


MIRA Safety gas masks come with enhanced speech diaphragms that allow for improved communication over shorter distances. But talking through a gas mask is never easy. Especially if you’re not right next to each other or you’re dealing with any noise, weather, or other distractions.


The MIRA Safety Gas Mask Microphone is cross-compatible with all adult-sized MIRA Safety gas masks, making it easy to swap between masks for different types of missions. 

Installation takes just a few seconds, and you’re ready to connect to your existing communication system. Just like a standard headset, the microphone requires no additional power, and it has an average life expectancy of 30,000 hours.

Gas mask microphones are a relatively minor upgrade that can make a massive difference while using your mask. Communicating via hand signals is difficult in the best situation, and it’s impossible if you’re holding a rifle or riot shield. Having the ability to plug into your existing comms helps you stay better informed and make better decisions when they matter most.

Gas Mask Microphone Technical Data:

Electro-Acoustic Data
Type: Noise cancelling, Dynamic, Moving Coil
Output Impedance (1kHz): 150Ω ± 10%
Real Output Level (at usual voice level): 3.5mV rms ± 10%
Harmonic Distortion: max. 5% over a bandwidth of 315 Hz to 4000 Hz
Frequency Response (94 dB SPL, 1/1 octave bands): 500 Hz -5 ± 3 dB
1000 Hz Reference
2000 Hz 0 ± 3 dB
4000 Hz 2 ± 3 dB

  

Environmental & Other Data
Weight (including cable): 50g ± 10%
Cable Connector Type: NEXUS U-173/U OR 3.5mm Jack 
Cable Connector Pinout: 1 - Microphone Signal (MIC +)
2 - Microphone Signal (MIC -)
Cable Length: 400mm 150Ω ± 5%
Cable Strength: 20 N / 20 S
Operating Temperature: (-33 to +71) °C
CE Certification:
Approved according to PPE directive 89/686/EEC and EMC directive 89/336/EEC
EMC / EMI: Designed in accordance with MIL-STD-461G
Environmental: Designed in accordance with MIL-STD-810G
CBRN: Designed in accordance with ČSN EN 140
Ingress Protection (IEC standard 60529): IP67
Flame Retardant Properties (UL 94): min. level V2
Mean Time Between Failures (MTBF): >30,000 hours

 

IMPORTANT NOTE: This gas mask microphone is ONLY compatible with MIRA Safety respirators. This includes the CM-6M, CM-7M, CM-8M, and the TAPR. 

STORAGE: The gas mask microphone is designed to be stored with your CM-6M or CM-7M gas mask. See storage guidance for those masks.

 

Restrictions

Restrictions on the Purchase, Ownership, or Possession of Body Armor are as follows:

It is a violation of United States Federal Law for a person convicted of a violent felony to purchase, own, or possess body armor. In addition, various states also have enacted legislation restricting the purchase, ownership, or possession of body armor by persons convicted of drug crimes, certain other felonies, or other violent crimes. By purchasing body armor from Hoplite Armor, LLC you acknowledge and certify that:

  1. You have not been convicted of a felony.
  2. The end user has not been convicted of any other crime that would restrict their ability to purchase, own, or possess body armor under any applicable Local, State, or Federal law ordinance or restriction.
  3. The end user will not use any body armor purchased from Hoplite Armor, LLC for any criminal purpose.
  4. The end user is over the age of 18.
  5. The end user will not transport or use any Hoplite Armor products outside of the United States.

Hoplite Armor, LLC reserves the right, in its sole discretion, to refuse the sale of body armor to any person or entity. Additionally, the online sale of body armor to residents of Connecticut and NY is strictly prohibited, unless the sale is made to certain law enforcement or military personnel, or through a face-to-face transaction.

Hoplite Armor does not ship any products outside of the United States in compliance with ITAR regulations. By purchasing, owning, or possessing Hoplite Armor systems, the end user certifies that no Hoplite Armor products will be transported or used outside of the United States.

All statements contained herein, or in any other related Hoplite publication of any kind, are not designed to provide legal counsel in any way, shape or form. It is strongly recommended that customers conduct a reasonable amount of Due Diligence prior to purchasing, owning or possessing body armor in order to avoid any legal ramifications.

***DUE TO THE LIFE-SAVING NATURE OF ARMOR PRODUCTS, ALL SALES ARE FINAL***

Hoplite Armor Lifetime Body Armor Warranty Terms and Conditions:

Hoplite Armor LLC stands behind the reliability and quality of the products we sell. In the unfortunate event that you are shot while wearing products purchased from us, we will replace damaged equipment at no cost to you at any time, as long as a valid police report is provided. This covers all of our body armor products, which includes Body Armor, Plate Carriers, Pouches/Accessories and Apparel. 

Proof of purchase required, only applies to original purchaser, and product must be purchased from Hoplite Armor LLC to qualify. Police report or internal report (if worn in the line of duty) is required as proof of the incident. Picture of the label and serial number is required and must match the serial number associated with the order in our system. Only the damaged product(s) will be replaced. We will replace it with the same product, if unavailable we may replace it with a similar product or reserve the right to issue store credit equal to the original purchase price. 

Warranty only applies to legitimate instances of self defense. Does not cover intentional damage or damage resulting from gross negligence. For example, we will replace your armor if you get shot in a home defense incident. We will not replace it if you shoot it intentionally yourself for any reason, or have your friends shoot you while wearing it. We will not replace it if you are shot while committing a crime such as robbing a bank or convenience store. This warranty does not cover theft.


You may also like