NIJ Certified Level IV Side Plates (26227-26228)

~SOLD IN PAIRS~

Nominal 6×6 or 6x8 inch single curve hard armor side plate. Manufactured from high-density alumina ceramic core (Al2O3) backed with layered composite fiber. Finished in a black cordura nylon covering.

Ballistic Protection to NIJ 0101.05 Level IV Stand Alone.

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Some popular items/sizes may incur a 4-8 week lead time.  

Specs:

• Weight: 2.63 lbs, 3.5 lb
• Thickness: .73"
• Level: IV

Rounds Defeated: 

Size:

6" x 6"
6" x 8"

Weights and measurements are nominal 

Hoplite Armor III+ Dangler Pouch Plates

Level III++ Multicurve Shoulder Plates (19503)

~SOLD IN PAIRS~ 

The III++ Hard Armor Shoulder Plate, or HASP, is the pinnacle of the HASP line and is our Flagship product.

The Hoplite Armor Level III++ Hard Armor Shoulder Plate weighs only 1.4 lbs. per plate and at only 0.75″ thick is rated to stop 5.56 (M193), .308, 7.62×39 Mild Steel Core and M855 / Greentip rounds as well as all lesser threats.

The Hoplite HASP is a unique Level III++ design unlike anything currently on the market. The HASP System provides extended coverage to the upper body via the deltoid and covers the vital organs, protecting the wearer from lateral impacts.

The HASP is fabricated according to the highest quality standards, using the best polymer / ceramic composite materials. The HASP will fit in the standard DAPS carrier or in our custom lightweight Laser Cut Carrier and easily attaches to any existing torso plate carrier.

• ONE SIZE FITS ALL
• Includes Laser Cut Carrier

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Some popular items/sizes may have a 4-10 week lead time.  This product in particular is a custom solution that requires specific materials. It is however well worth the wait.

Specs:

• Weight: 1.4 lbs
• Thickness: .75"
• Size: 6" x 8"
• Level: III++

Rounds Defeated:  

Level IIIA Multicurve Shoulder Plates (19502)

~SOLD IN PAIRS~

The Hoplite Armor Level IIIA Hard Armor Shoulder Plate, or HASP, weighs only 0.5 lbs. per plate and is only 0.375″ thick. This is the thinnest and lightest HASP option available.

Rated to stop multiple hits of 44 Magnum and lesser threats, the Hoplite HASP is a unique Level IIIA design unlike anything currently on the market. The HASP System provides extended coverage to the upper body via the deltoid and covers the vital organs, protecting the wearer from lateral impacts.

The HASP is fabricated according to the highest quality standards, using the best polymer based materials available. The HASP (Hard Armor Shoulder Plate) will fit in the standard DAPS carrier or in our custom Laser Cut Carrier and easily attaches to any existing torso plate carrier.

Made in the USA by LTC, Leading Technology Composites.

• ONE SIZE FITS ALL
• Includes Laser Cut Carrier 

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Some popular items/sizes may incur a 4-8 week lead time. 

SPECS

• Weight: .5 lbs
• Thickness: .375
• Size: 6" x 8"
• Level: IIIA

Rounds Defeated: 

Level III+ Groin Plate

NOW AVAILABLE IN 4 CARRIER COLOR OPTIONS

Hoplite Armor is known for being the industry leader in body armor design and development. Our line of extremity protection plates have set a new standard in the world of personal protection and our NEW Level III+ Groin Plates are no exception.

Designed using advanced polymer based armor materials, the Groin plate in thin, light, easy to wear and highly capable. This plate can stop numerous rounds of all Level III threats and beyond.

The standard strategy in close quarters combat has changed from "shooting center mass" to "aiming for the hips". Center mass is of course the largest target, but with armor having become so prevalent, the modern mindset is to aim for the second largest target which is the hips. When worn with our Femoral and Dangler Plates this adds a level of protection unseen anywhere else and provides protection against modern combat tactics unavailable through any other source.

Designed to fit any belt. Quick release buckles allow for easy integration and use with any platform.

We currently have a limited number of these available. Groin Plates are In Stock and the Carriers are in the final phase of production now. ETA at our warehouse is 1/30/2023 or sooner. Be one of the first to get access to this groundbreaking new technology.

Order yours today. Some popular items/sizes may have a 4-8 week lead time. 

SPECS

Nominal Weight and Dimensions 4.8" x 7.8" / .5 lbs

III+ Femoral Plates (19520)

Hoplite Armor is the world leader in advanced body armor design and our New III+ Femoral Plates are no exception. Designed to provide frontal protection to the femoral arteries, a common source of life threatening injuries. Use in conjunction with our Hard Armor Shoulder Plate system in order to maximize protection to the extremities.

Multicurve shapes match the geometry of the human body in order to maximize surface area contact thereby reducing wear stress and fatigue, allowing the system to be worn for long periods of time in any environment.

The unique laser cut carrier design is made using Squadron polymer laminate fabric resulting in an extremely durable, simple, lightweight plate carrier system. The minimalistic design prevents tenting on the backside of the plate in order allow for a seamless fit. 

Can also be worn under clothing using standard compression fit Football Pad Girdles such as the one shown in our image carousel. We strongly recommend this carrier type for use in a concealed armor configurations.

Lightweight and highly ergonomic, this system attaches to a standard 1.75” MOLLE battle belt allowing the system to move with the wearers body without hindering the natural range of motion. 1 vertical support and 2 lateral elastic supports comfortably maintain the position of each plate even under the harshest conditions. 

• Lightweight, only 1 pound per plate
• Thin plates, less than .6" thick
• Kit includes 2x 6"x10" III+ Hard Armor Plates and Carrier
• Highly ergonomic, designed in 3D to match the geometry of the human body
• Made from Buoyant polymer armor materials
• Protects the lower extremities against frontal impacts
• Stops a wide range of rifle ammunition (Level III plus 7.62x39 MSC)
• Multi-hit, edge to edge protection
• Zero spall, polymer armor absorbs rounds on impact
• Made in the USA by LTC exclusively for Hoplite Armor

Some popular sizes/items may require a 4-10 week lead time.  

Rounds Defeated:  

Question? Call 855-ARMOR-01

IIIA Femoral Plates (19522)

Hoplite Armor is the world leader in advanced body armordesign and our New IIIA Femoral Plates are no exception. Designed to provide frontal protection to the femoral arteries, a common source of life threatening injuries. Use in conjunction with our Hard Armor Shoulder Plate system in order to maximize protection to the extremities.

Multicurve shapes match the geometry of the human body in order to maximize surface area contact thereby reducing wear stress and fatigue, allowing the system to be worn for long periods of time in any environment.

The unique laser cut carrier design is made using Squadron polymer laminate fabric resulting in an extremely durable, simple, lightweight plate carrier system. The minimalistic design prevents tenting on the backside of the plate in order allow for a seamless fit. 

Can also be worn under clothing using standard compression fit Football Pad Girdles such as the one shown in our image carousel. We strongly recommend this carrier type for use in a concealed armor configurations.

Lightweight and highly ergonomic, this system attaches to a standard 1.75” MOLLE battle belt allowing the system to move with the wearers body without hindering the natural range of motion. 1 vertical support and 2 lateral elastic supports comfortably maintain the position of each plate even under the harshest conditions. 

• Lightweight, only 11 ounces per plate
• Thin plates, less than .375" thick
• Kit includes 2x 6"x10" IIIA Hard Armor Plates and Carrier
• Highly ergonomic, designed in 3D to match the geometry of the human body
• Made from Buoyant polymer armor materials
• Protects the lower extremities against frontal impacts
• Stops a wide range of ammunition up to 44 Magnum (see attached test report)
• Multi-hit, edge to edge protection
• Zero spall, polymer armor absorbs rounds on impact
• Made in the USA by LTC exclusively for Hoplite Armor

Some popular sizes/items may require a 4-10 week lead time. 

RESTRICTED, CIVILIAN USE ONLY

Question? Call 855-ARMOR-01

NIJ Certified Level IIIA 6x8 Side Plates (19301)

~SOLD IN PAIRS~

Our Level IIIA Hard Armor plates provide significant injury reduction as compared to soft armor of the same level due to minimized backface deformation. Hard Armor plates are also much easier to wear concealed as they conform better to the body, which in turn improves long term wearability.

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Some popular items/sizes may incur a 4-8 week lead time.  

Specs:

• Weight: .6 lbs, 
• Thickness:.35"
• Size: 6" x 8"
• Level: IIIA

Rounds Defeated:  

NIJ Certified Level III+ Side Plates

~SOLD IN PAIRS~

Two Level III single curve inserts. Manufactured from Ultra High Molecular Weight Polyethylene. Finished in black Cordura nylon covering. 

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Some popular items/sizes may incur a 4-8 week lead time.  

Specs:

• Weight: 1.15 lbs
• Thickness: 1.15"
• Size: 5"x7"
• Level: III+

Rounds Defeated:   

Materials
Ultra High Molecular Weight Polyethylene
Covered in black Cordura

Weights and measurements are nominal 

Level III+ Multicurve Shoulder Plates (19500)

Shoulder Plates are critical in close quarters or urban combat scenarios as injuries to this area can be extremely common and highly debilitating.

The Hoplite Armor Level III+ Hard Armor Shoulder Plate weighs only 1.2 lbs. per plate and is only 0.75″ thick. Made using Dyneema HB212, this is an extremely high performing plate made from very high-end polymer armor materials.

The Hoplite HASP (Hard Armor Shoulder Plate) is a unique Level III+ design unlike anything currently on the market. The HASP System provides extended coverage to the upper body via the deltoid and covers the vital organs, protecting the wearer from lateral impacts.

The HASP is fabricated according to the highest quality standards, using the best polymer based materials available. The HASP (Hard Armor Shoulder Plate) will fit in the standard DAPS carrier or in our custom Laser Cut Carrier and easily attaches to any existing torso plate carrier.

• ONE SIZE FITS ALL
• Includes Laser Cut Carrier
• 4 Color Options

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Some popular items/sizes may have a 4-10 week lead time.  

Specs:

• Weight: 1 lbs
• Thickness: .75"
• Size: 6" x 8"
• Level: III+

Rounds Defeated:  

NIJ Certified Lightweight Level IV Side Plates (26300)

~SOLD IN PAIRS~

The 26300-11 is a 6x6 high end ballistic solution comprised of a Boron Carbide ceramic core, supported by a lightweight Dyneema HB212 backer plate.

The result is a lightweight, Triple Curve, NIJ 04 Level IV certified ballistic solution capable of defeating multiple hits of 5.56 (M193, M855, M855A1), 7.62x39 (FMJ, M1943, API), 7.62 x 51mm (M80 Ball/M61AP, M80A1) and is also capable of stopping 7.62 x 54R (LPS/B-32API) and 30.06 AP M2.

This is an extraordinary plate at a discounted price.

Some popular items/sizes may incur a 4-8 week lead time.  

Rounds Defeated:

Weights and measurements are nominal 

Hoplite Armor Dangler Pouch