Lightweight 26125 Swimmer Plates / Mark II Carrier Combo

The Mark II Plate Carrier Combo is the perfect civilian body armor solution at an affordable price. The carrier platform is highly capable, rugged and minimalistic. The 26125 Series NIJ Certified Level IV is a proven body armor plate in its class and is made in the USA by LTC, Leading Technology Composites.

This configuration represents the perfect combination of weight, coverage, mobility functionality, and affordability.

• 100% Made in the USA 
• Top Quality Materials and Construction  
• 5 Year Manufacturers Warranty 
• Multi-hit Edge to Edge Protection  
• Perfect ergonomics 
• Guaranteed Performance  
• Extremely Durable, High Quality Carrier
• Economical Solution 
• Includes (Qty: 2) 26125 Swimmer plates 

These are without question the best deal available for top quality body armor plates. The materials used in the fabrication of these plates allows for projectiles to be absorbed within the plate itself, preventing dangerous spall as is common with steel plates. Don't rely on your carrier to stop high speed bullet fragmentation.

Our 10×12 inch single-curve hard armor swimmer cut plate is certified NIJ 0101.04 Level IV Stand Alone. Manufactured from high-density alumina ceramic core (Al2O3) backed with layered polymer composite fiber.

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Fits all standard carriers. 10x12 medium or large carrier.

Some popular items/sizes may incur a 4-8 week lead time. 

Specs:

• Weight:  7.0 lbs
• Thickness: .70"
• Level: IV

 Rounds Defeated: 

 Sizes:

10" x 12" Plates & Small/Medium or Large/XL Carrier

Finished in Cordura Nylon Covering. 

Questions? Call 855-ARMOR-01

NIJ Certified Level IV Swimmer Plates (26125) 

~SOLD IN PAIRS~

These are without question the best deal available for top quality, LIGHTWEIGHT body armor plates. The materials used in the fabrication of these plates allows for projectiles to be absorbed within the plate itself, preventing dangerous spall as is common with steel plates. Don't rely on your carrier to stop high speed bullet fragmentation.

Our 10×12 inch single-curve hard armor swimmer cut plate is certified NIJ 0101.04 Level IV Stand Alone. Manufactured from high-density alumina ceramic core (Al2O3) backed with layered polymer composite fiber.

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Fits all standard carriers. 10x12 medium or large carrier.

Some popular items/sizes may incur a 4-8 week lead time. 

Specs:

• Weight:  7.0 lbs
• Thickness: .70"
• Level: IV

Rounds Defeated: 

Sizes:

10" x 12"

Finished in Cordura Nylon Covering.

26225/6 Swimmer Plates / Mark II Carrier Combo

The Mark II Plate Carrier Combo is the perfect civilian body armor solution at an affordable price. The carrier platform is highly capable, rugged and minimalistic. The 26225 Series NIJ Certified Level IV is a proven body armor plate in its class and is made in the USA by LTC, Leading Technology Composites.

This configuration represents the perfect combination of weight, coverage, mobility functionality, and affordability.

• 100% Made in the USA 
• Top Quality Materials and Construction  
• 5 Year Manufacturers Warranty 
• Multi-hit Edge to Edge Protection  
• Perfect ergonomics 
• Guaranteed Performance  
• Extremely Durable, High Quality Carrier
• Economical Solution 
• Includes (Qty: 2) 26225/6 Swimmer plates 

These are without question the best deal available for top quality body armor plates. The materials used in the fabrication of these plates allows for projectiles to be absorbed within the plate itself, preventing dangerous spall as is common with steel plates. Don't rely on your carrier to stop high speed bullet fragmentation.

Our 8x10 and 10×12 inch single-curve hard armor swimmer cut plate is certified NIJ 0101.05 Level IV Stand Alone. Manufactured from high-density alumina ceramic core (Al2O3) backed with layered polymer composite fiber.

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Fits all standard carriers. 8x10 small carrier. 10x12 medium carrier.

Some popular items/sizes may incur a 4-8 week lead time. 

Specs:

• Weight:  5.9 Lbs, 8.25 lbs
• Thickness: .73"
• Level: IV

 Rounds Defeated: 

 Sizes:

10" x 12" or 8" x 10" Plates & Small/Medium or Large/XL Carrier

Finished in Cordura Nylon Covering. 

Questions? Call 855-ARMOR-01

Level III+ Multicurve Shoulder Plates (19500)

Shoulder Plates are critical in close quarters or urban combat scenarios as injuries to this area can be extremely common and highly debilitating.

The Hoplite Armor Level III+ Hard Armor Shoulder Plate weighs only 1.2 lbs. per plate and is only 0.75″ thick. Made using Dyneema HB212, this is an extremely high performing plate made from very high-end polymer armor materials.

The Hoplite HASP (Hard Armor Shoulder Plate) is a unique Level III+ design unlike anything currently on the market. The HASP System provides extended coverage to the upper body via the deltoid and covers the vital organs, protecting the wearer from lateral impacts.

The HASP is fabricated according to the highest quality standards, using the best polymer based materials available. The HASP (Hard Armor Shoulder Plate) will fit in the standard DAPS carrier or in our custom Laser Cut Carrier and easily attaches to any existing torso plate carrier.

• ONE SIZE FITS ALL
• Includes Laser Cut Carrier
• 4 Color Options

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Some popular items/sizes may have a 4-10 week lead time.  

Specs:

• Weight: 1 lbs
• Thickness: .75"
• Size: 6" x 8"
• Level: III+

Rounds Defeated:  

The T.R.A.P.™ is designed to guard against very fast transients from any source. This includes radiated energy from a nearby lightning strike or an overhead electromagnetic pulse (EMP).

The T.R.A.P.™-AC contains a high-voltage 5,000-watt transient voltage suppression device in a form factor that plugs into the three-prong AC receptacle of an inverter or portable generator.

There are two fundamental ways to protect inverters and portable generators.

1. Enclose the inverter or generator in something conductive. EMP bags and EMP cloth do a great job of providing protection.
2. Use transient protection devices. The Transient Reducing Auxiliary Plugs (T.R.A.P.s) can be inserted into the 12-volt DC auxiliary and 120-volt AC plugs to provide transient protection.

What will a T.R.A.P.™ devices protect against?
The T.R.A.P.™ is designed to guard against very fast transients from any source. This includes radiated energy from a nearby lightning strike or an overhead electromagnetic pulse (EMP).

How can the T.R.A.P.™ devices be effective against an EMP when they’re so small?
The danger to inverters and portable generators from an EMP is the high voltage that is introduced on the cables from E1 and E2. Those transient voltages are extremely brief in time (from nanoseconds to microseconds) and can therefore be suppressed using small devices. This is distinctly different than the case with homes, which would also experience a powerful E1 current surge from the power grid.

Can you use more than one T.R.A.P.™ in a generator or inverter?
Absolutely. Putting energy “traps” at multiple points in your generator or inverter helps to better shunt away the unwanted energy.

Does the T.R.A.P.™-AC have an outlet on the back side?
No. The back of the T.R.A.P.™-AC is enclosed. It does not pass power through it.

T3 Triton Operator Belt, Gen 3 

The updated design of the Gen 3 delivers all of the same comfort with increased functionality and durability. We adjusted the width to accommodate a larger variety of holsters. The 1.75 inch D-Ring Cobra Buckle is the most secure way to attach a retention lanyard or other accessories.

• Fully adjustable to customize the fit
• Inner Riggers Belt made of loop Velcro will not pick up debris when worn on its own
• Stiff outer duty belt is made from scuba webbing and is lined with hook Velcro to easily secure to inner belt
•  Features 2 rows of MOLLE panels that provide plenty of real estate to attach any number of compatible accessories
•  1.75 inch D-Ring Cobra Buckle Cobra Buckle makes this belt easy to secure and remove
• Length Small - 26-30 Medium 28-32 Large 32-36 XL 35-39
• Width: 1.75”
• Weight: 12oz

 Sizing Guide:

Small 26-30 

Medium 28-32 

Large 32-36 

X-Large 35-39

Some popular items/sizes may incur a 4-8 week lead time. 

T3 Tourniquet Pouch - Gen 3

• Outer layer: beefy 500D solution dyed Cordura 
• Reverse stitching is used wherever possible to enhance durability
• Minimal use of binding tape
• T3 Maritime MOLLE Closure system 
• Dimensions: W:6” H:7" D:2.5” 
• Weight: 2.89 oz

Some popular items/sizes may incur a 4-8 week lead time. 

*Banned in Maryland, requires a pyrotechnic license in California

Each XM42 Lite is precision formed and hand-assembled in the USA using numerous different components and high quality materials. Fuel tanks are fully hand TIG welded and pressure tested. Many electrical components and wiring are hand soldered. We pour significant effort and technical skill into each build, and take pride in our work. We buy parts from and employ the services of local businesses, and do our best to acquire as much as possible from American companies. Due to the semi-custom nature of the product, slight variations in finish, dimensions, and materials may occur. 

The XM42 Lite is fully disassemble-able by the end user if necessary for aftermarket custom finishing.

By agreeing to purchase and/or receive a model of the XM42 Lite from Flash Point Industries, LLC, you understand and acknowledge that use of the XM42 Lite may result in injury or even death. In recognition of the inherent risks of the XM42 Lite, you confirm that you are physically and mentally capable of handling, operating, and/or using the XM42 Lite. You further confirm that you will not permit anyone under the age of 18, or anyone over 18 who you do not believe is mentally capable, to handle, use, or operate the XM42 Lite. You participate willingly and voluntarily and assume full responsibility for personal injury, accidents, or illness, including death. You also assume responsibility for damage to or loss of personal property as the result of an accident. 

In consideration of the Activity provided, you, for yourself and your heirs, personal representatives or assigns, do hereby waive, release, discharge, hold harmless, and indemnify Flash Point Industries, LLC, any related entities, and their members, managers, agents, employees, and volunteers (the “Releasees”), from any and all liability, claims, cause(s) of action, present or future, and waive any claims for economic damages, personal injury damages, emotional distress damages and all other damages arising from my handling and/or use of the XM42 Lite, even if they arise from or are increased as a result of the negligence of the Releasees.

BY ORDERING YOU CONFIRM THAT YOU HAVE HAD SUFFICIENT OPPORTUNITY TO READ THIS ENTIRE AGREEMENT. YOU UNDERSTAND IT AND AGREE TO BE BOUND BY ITS TERMS. YOU UNDERSTAND THAT BY AGREEING TO THIS DOCUMENT, YOU MAY BE WAIVING VALUABLE LEGAL RIGHTS. 

Rogue 3.0 Plate / Carrier Combo

The Hoplite Armor Rogue Plate / Carrier Combo 

This kit includes the Rogue 3.0 Carrier and a set of either 26605-17 (Small) or 26605-18 (Medium) NIJ 06 Certified Level IV Plates. Fits most people between 120-180 lbs.

The 26605 is a Triple-curve hard armor, Multi-Hit, Stand Alone, SAPI plate certified under the NIJ 0101.06 Level IV Standard. Manufactured from high-density, reinforced alumina ceramic core (Al2O3) backed with lightweight layered polymer composite fiber and finished in a black Cordura Nylon Covering.

A foam pad is affixed to the Strike Face in order to protect against severe and repeated drops. NIJ standards require 2 drops. These plates must pass the internal 10 drop test and are inspected via X-Ray prior to environmental and ballistic testing.

The Rogue carrier is made from high strength Laser Cut Composite Laminate Fabric, and uses Top Quality Webbing and our Loop Fastening System. The Rogue isd sleek, slim, highly capable and concealable jackets of windbreakers.

 Features

• 100% MADE IN THE USA
• NIJ Certified
• Multi-Curve
• Multi-Hit
• 1 piece body construction 
• Unparalleled strength 
• Minimalistic design
• Only 13 lbs total
• Loop Fastening System
  
• Integrated LC MOLLE 
• Wide range size adjustability 
• Highly durable 
• Concealable 

Specs:

Fits Small and Medium Swimmer and SAPI Plates

The sturdiest and most simplistic Laser Cut Carrier ever developed. Ideal for high speed or covert applications. Easily concealed with only a windbreaker

Some popular items/sizes may incur a 4-8 week lead time. 

Hoplite ACH Level IIIA Fully Loaded Helmet

 Made in the USA by Armor Source. The best performing, best made and most trusted helmets on the planet.

Shells

The AS-200 Ballistic Helmet is the most affordable ACH/ MICH Shape NIJ Level IIIA protection helmet on the market today Offering proven fragmentation protection capabilities matched by our dedication to trim unwanted weight, the AS-200 is adaptable for use with all ArmorSource accessories, rails and shrouds and is relied on today by military organizations worldwide. 

Support and Retention

The AS-200 Series Helmet comes with the AireLink retention system designed for boltless and bolted ballistic helmets. Durable and weight-conscious, this ACH style retention/chinstrap is the preferred solution for military organizations throughout the USA and around the globe. This 4 point system features 3/4” nylon webbing, a large nape pad and heavy duty chin strap clip offering a wide range of adjustments and reduced weight as compared to standard hardware based retentions.

Replaces the R2 and R4 Retention Systems

The new AireSupport Prime system introduces a unique approach to modern day suspension systems. When combined with ArmorSource’s certified shells, the AireSupport Prime aids our solutions in exceeding the U.S. Army’s Blunt Impact requirements, improves ballistic and environmental performances, and delivers optimal comfort for users with a 30% weight reduction vs equivalent premium systems.

Replaces P4 Suspension System.

All Helmets Are Custom Made to Order

5 Week Estimated Lead Time

LEVEL IIIA ACH Helmet

• High Cut Shell
• Velcro
• Bungee
• M-Lock Aire Rail System
• Aire Mount NVG Shroud
• Aire Link Retention System
• Aire Support Cushion System
• Adjustable CAM Retention System

PISTOL THREATS DEFEATED

HOW TO FIT YOUR HELMET

Getting the right fit is important for performance and comfort. Use a tape measure and caliper to take measurements. The wearer MUST be seated in an upright position for proper fitting. See the illustrations for correct measuring points.

NOTE: If any measurement falls on the dividing line between sizes, select the larger size.

Double Mag Pouch LC

Unlike our previous pouches, this style can be used with or without the bungee retention. Constructed primarily from Squadron, this pouch bridges the gap between fixed polymer pouches and soft 500D Cordura options.

• Sized to accommodate two standard double-stack magazines (Gloc 19/17, M18, M9, etc.)
• Multiple bungee routing options for additional magazine retention.
• Rubberized fabric helps to further secure the magazine
• Dimensions: W:3” H:3.5” D:1”
• Weight: 1.5oz

NIJ 06 Certified Level III+ Swimmer Plates (23620)

~SOLD IN PAIRS~

These Multi Curve NIJ 06 Certified Level III(+) plates are manufactured from Ultra High Molecular Weight Polyethylene and are capable of stopping multiple hits of all Level III rounds plus 7.62x39 mild steel core.

Finished in Black Line-X. Foam pad on the back to reduce blunt force impact trauma.

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply. 

Some popular items/sizes may incur a 4-8 week lead time.  

SPECS

Rounds Defeated:  

Materials
Ultra High Molecular Weight Polyethylene
Covered in Black Line-X