The NEST-Z 7.0 mil Moisture Barrier 5-layer EMP bag is the highest-rated zip-lock closure EMP bag on the market, making them ideal for packaging and transporting high-value, sensitive electronic parts, military equipment, and medical devices. With 11,500 PSI tensile strength, 33lb puncture resistance, and >40db EMI attenuation, this bag is highly effective. NEST-Z bags have been tested to meet or exceed electrical and physical requirements of ANSI/ESD S541 and to be ANSI/ESD S20.20 compliant. The bags are ROHS compliant and lead-free. NOTE: These bags are for EMP/HEMP/CME protection only, they do not provide shielding from cell signal, GPS, WiFi, etc.
The NEST-Z 7.0 mil Moisture Barrier 5-layer EMP bag is the highest-rated zip-lock closure EMP bag on the market, making them ideal for packaging and transporting high-value, sensitive electronic parts, military equipment, and medical devices. With 11,500 PSI tensile strength, 33lb puncture resistance, and >40db EMI attenuation, this bag is highly effective. NEST-Z bags have been tested to meet or exceed electrical and physical requirements of ANSI/ESD S541 and to be ANSI/ESD S20.20 compliant. The bags are ROHS compliant and lead-free.
NOTE: These bags are for EMP/HEMP/CME protection only, they do not provide shielding from cell signal, GPS, WiFi, etc.
Description
The Faraday Defense NEST-Z EMP Bag is designed to protect electronics against harmful electromagnetic radiation and electrical currents that would otherwise destroy it. Aluminum layers provide a static-safe environment for sensitive electronic devices. Strong, heavy-gauge, polyester layers help prevent sharp objects from puncturing and destroying the bags effectiveness. The NEST-Z bag is heat-sealable and suitable for vacuum packing.
Material 2 Heavy-gauge, static-dissipating polyester layers 2 Aluminum barrier shield layers 1 Additional polyester inner layer for added strength
Product Details 33 lb puncture resistance (FTMS 101-C, 2065.1) 11,500 PSI tensile strength >50 dB EMI attenuation (MIL-PFR-81705-REV.D) ANSI/ESD S20.20 compliant 12 Ohms / Sq. In. surface resistance (ASTM 1-257) RoHS compliant and lead-free Made in USA
Heat Sealing Conditions Temperature (400 degrees F, 204 degrees C) Time (.6 to 4.5 seconds) Pressure (30 70 PSI, 206-482 kPa)
Universal Shielding Designed for universal shielding of all laptops, tablets, cell phones, key fobs, credit cards, small hard drives and USB drives.
All statements, technical information, and recommendations related to Faraday Defenses products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in Faraday Defenses current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of Faraday Defense.
Faraday Defense will not be liable for any indirect, special, incidental or consequential loss or damage arising from this product, regardless of the legal theory asserted.
Broadband EMP Ferrites
Regular price
$13.00
Save $-13.00
The ferrites offered here provide excellent suppression of energy from a broadband pulse, like that of an EMP. Select a size that will clip around your cable -- too large is okay, but not too small. Looping the cable through the ferrite helps to further reduce the transient, see video below.
Description
Ferrites are ceramic compounds that consist of a mixed oxide of iron and one or more other metals. They have long been used to protect sensitive electronic equipment from conductive transients. Ferrites offer a simple, but effective, way of protecting items that must remain plugged in, such assolar panels, charge controllers, generators, computers, or amateur radios. They can even be used on some automobile wiring.They are very simple to use. Simply click them around the cable feeding the sensitive item. Thats it!
When to use broadband ferrites? Clip-on broadband ferrites are often used to protect small appliances and electronics (e.g., computers, TVs, etc.). They simply clip around the power cord. They can also be used on solar power generation wires and other applications where ease of application is desired.
When to use high-saturation ferrites? Clip-on high-saturation ferrites are used in four scenarios:
1. High current is flowing through the wires, and you cant easily get to the ends of the wires to feed them through a toroid. 2. High current is flowing through the wires, and a clip-on broadband ferrite is not large enough to go around the wire bundle. 3. There is not enough space to fit a large toroid. 4. The application is such that a solid, non-hinging, ferrite is preferred.
When to use toroid ferrites? Toroid ferrites are great to use when you can feed the wire bundle through the ferrite. A good example is when trying to protect solar power generation system batteries. Simply disconnect the leads from the battery, feed through the toroid and reattach the leads to the battery (Toroid Ferrite Link).
How to install ferrites?
Broadband ferrites clip around wire bundles. High-saturation ferrites clip around individual high-current wires. Toroid ferrites are placed around wire bundles by feeding the wires through.
DEFCON™ Vehicle
Regular price
$439.99
Save $-439.99
DESCRIPTION
Modern vehicles are heavily reliant on electronic components, controlling every aspect of the vehicle. An EMP’s intense and rapid electromagnetic field can induce powerful electrical currents and voltages in the vehicle’s wiring and delicate electronic components, leading to severe damage. This electromagnetic interference can result in critical system upsets and permanent failures, stalling the vehicle and even destroying its engine control unit.
An EMP can disrupt satellite navigation systems, cellular connectivity, and communication with emergency services, leaving occupants stranded and without crucial assistance. Because of this realistic threat, we have developed DEFCON™ Vehicle to act as a shield against an EMP for your vehicle. The idea behind it is simple. The DEFCON™ Vehicle is designed to limit the induced energy that would couple into your vehicle, keeping its electronics from becoming damaged, and ensuring the safety and working status of your vehicle.
The DEFCON™ Vehicle comes in a weatherproofed package with ring terminals for easy installation and attachment. The module is also internally waterproofed using a potting compound. The device uses automotive-grade wire, ring terminals, and marine-grade heat shrink tubing, and comes in a convenient form factor for use across the battery terminals.
The DEFCON™ Vehicle can be installed in tight spaces under the hood of your vehicle using the holes and mounting screws. The ring terminals fit most battery post bolt clamp screws. The 36″ long cables let you install it as close or as far away from your battery as needed.
Voltage: 12-15 volts DC
Current: 9 mA consumption typical
Surge Current: 270,000 Amps total
Energy Rating: >2,000 Joules total
Turn-on Speed: <1 ns typical
Size: 4.5″ L x 3.375″ W x 1.875″ H
Wires:Positive, Negative, Ground
Wire Length:36″
Not for home use. Do not apply AC voltage.
Questions & Answers:
What is DEFCON™ Vehicle?
The DEFCON™ Vehicle is an ultra-duty surge protection device specifically designed to protect a vehicle’s electronics from damaging electromagnetic energy resulting from an electromagnetic pulse (EMP). Constructed using state-of-the-art metal oxide varistor technology, the DEFCON™ Vehicle is capable of shunting away an incredible 270,000 amps of current! When combined with the lightning-fast Transient Reducing Auxiliary Plug (TRAP) products and high-saturation current-damping ferrites, the DEFCON™ Vehicle is the latest addition to the world’s first comprehensive EMP auto protection system.
How does DEFCON™ Vehicle Work?
DEFCON™ Vehicle protects your vehicle by shunting (shorting) the over voltage coming into your vehicle’s electrical system. DEFCON™ Vehicle will “see” the surge and react in less than 1 billionth of a second. Since the shunting is completed incredibly fast, the over voltage is drained away from the vehicle before the voltage can rise high enough to produce any damage.
Do I need a DEFCON™ Vehicle if I already have an EMP Vehicle Kit?
The DEFCON™ Vehicle is designed to be an excellent addition to the EMP Vehicle Kit. It offers approximately 400 times the energy absorption and more than 2,700 times the max surge current of the TRAP-B. It is also designed with different turn on characteristics to supplement the Vehicle Kit, as well as a power-on indicator to let the user know that it is still active.
Does the DEFCON™ Vehicle work as a stand alone product or as a replacement to the EMP Vehicle Kit?
Although DEFCON™ Vehicle is a supplemental device designed to be added to the current Auto Protection Kit, it would function just fine as a standalone device too. The TRAPs and DEFCON™ Vehicle device both provide transient protection, but each using different technologies. The TRAPs use super-fast TVS diodes, and the DEFCON™ Vehicle uses slightly less fast (but very hefty) metal-oxide varistors.
Is there anything the DEFCON™ Vehicle is able to block that the EMP Vehicle Kit can’t?
DEFCON™ Vehicle could protect against indirect lightning better than the EMP Vehicle Kit. It also protects from unwanted transients caused from vehicle malfunctions.
When using the DEFCON™ Vehicle and the EMP Vehicle Kit together, is it safe to double up at the battery location with DEFCON™ Vehicle and the TRAP-B?
Yes, it is perfectly safe for both to be hooked up to the battery at once.
For a diesel engine with two batteries, do I need two DEFCON™ Vehicle units?
Yes, we would recommend this, to ensure that both electrical systems are protected.
Does the DEFCON™ Vehicle work for solar flares and CME’s?
Contrary to popular thinking, solar flares and CME’s will not affect vehicles. CME’s produce very low frequencies and only couple into long conductors that are miles long. In the unlikely event that a CME were to couple radiated energy into a vehicle, the DEFCON™ Vehicle would offer protection.
Will the DEFCON™ Vehicle protect my vehicle from lightning?
The DEFCON™ Vehicle introduces transient that may shunt away energy from a lighting strike, preventing damage to the vehicle’s electronics.
Will a lightning strike or EMP destroy the DEFCON™ Vehicle, and is it reusable?
An EMP will not destroy the DEFCON™ Vehicle. A direct lightning strike will destroy pretty much anything, including the DEFCON™ Vehicle, however, this is extremely rare, as most lightning strikes are indirect and will not damage the device.
Will the indicator light on the DEFCON™ Vehicle drain my battery?
Most car peripherals try to limit their off-state current draw to under 15 milliamps. The DEFCON™ Vehicle indicator light draws 9 milliamps of current. Typical car batteries have around 55,000 milliamps-hours of capacity. Therefore, even if the vehicle sat for an entire month unused, the light would only draw off about 10% of the battery.
How do I mount the DEFCON™ Vehicle?
The DEFCON™ Vehicle attaches across a standard 12-volt automobile battery. Installation instructions will be included in the package, along with a link to a video of the installation process.
What does the indicator light mean?
The DEFCON™ Vehicle indicator light indicates that the unit is receiving power and therefore properly connected to the battery. If the unit is compromised, the indicator light will turn off.
Does the DEFCON™ Vehicle work even when my vehicle is turned off?
Yes, like the EMP Vehicle Kit, the DEFCON™ Vehicle is designed to protect both when the vehicle is on or off.
Is there a warranty on the DEFCON™ Vehicle?
The DEFCON™ Vehicle comes with a 10-year limited lifetime warranty.
Comparing TRAPs toDEFCON™ Vehicle
TRAP
TRAP-B
DEFCON™Vehicle
Energy Absorption
5 Joules
5 Joules
>2,000 Joules
Surge Current
95 Amps
95 Amps
270,000 Amps
Protection Technology
TVS Diode
TVS Diode
MOV
Turn-on Speed
<1 ps typical
<1 ps typical
< 1 ns typical
Power-on Indicator
No
No
Yes
Installation
Plugs in auxiliary receptacle
Connects across battery terminals
Connects across battery terminals and to chassis, mounts to vehicle frame
CORDURA® Berry Compliant JACKET Faraday Bags
Regular price
$69.99
Save $-69.99
The all new CORDURA® Berry Compliant JACKET has all the advantages of the Original JACKET and more! Sold in multiple sizes, these bags will fit mobile phones up to standard laptops. Proven performance in the world’s toughest environments, the outer layer of CORDURA® 1000 Denier (1000D) Coated Nylon Fabric is resistant to abrasion, has an excellent tear strength and is water repellent. Shielding levels are also top of the line at >85 dB, 10MHz-10GHz. This is achieved with triple inner layers of premium CYBER Berry-RS, Metal-plated, Nylon-based ripstop fabric. Our secure, easy-open, Velcro closure ensures quick access to your device. Additionally, they are built for endurance with extra-thick bindings and bar tacking on the corners for reinforcement. Proudly made in the USA of 100% Domestically-sourced raw materials, these bags are ready for military and police contracts, meeting all military standards.
CORDURA® Outer Layer Features:
Fabric weave: 1000 x 1000 Denier textured Nylon
3/4-1 oz/sq yd clear Polyurethane coating on fabric back
Durable water-repellent finish on fabric
Excellent resistance to fading, abrasion, rot and mildew
Grab Tensile strength – 528 x 472 lb
BERRY COMPLIANT:
Berry Compliant means this product is made in the USA and made from USA-sourced materials. This is not only relevant for the Department of Defense but for the individual consumer as well. Selecting Berry Compliant products guarantees you are not just shopping “Made in USA” or local, but you are at the core supporting American raw goods, manufacturing and production.
The JACKET Faraday Bags by Faraday Defense are designed for UNIVERSAL shielding of laptops, tablets, cell phones, key fobs, credit cards, small hard drives and USB drives. They block the following common signals: Cell Towers, GPS, RFID, Bluetooth and Wi-Fi.
❌BLOCK SIGNAL:Blocks Bluetooth, Wi-Fi, Cell Signals (incl. 5G networks), GPS for anti-tracking, and RFID.
❌ENTERPRISE GRADE:Designed for military, police departments, forensic investigators, government and executive travel, personal data security, signal isolation, EMF reduction and EMP protection.
❌CYBER BLOCKING:Three layers of specialized metal-plated fabric containing nickel and copper shielding elements. Dissipates signals from both exterior and interior sources. Effectively blocks communication of signals to and from your device with >85 attenuation (400Mhz-4Ghz). Secure double-roll and Velcro closure.
Additional features include:
Double-fold Velcro seal for enhanced blocking
Three layers of CYBER fabric
High-quality exterior construction and durability
Non-window design
This bag will isolate a device and ensure that it cannot be connected remotely, preventing remote hacking, wiping of data/evidence and surveillance.
SIZES
4.5″ x 8″ – for phones
7.5″ x 10″ – for tablets
9″ x 12″ – for large tablets
14″ x 16″ – for laptops
CLIENTS
Police
Military
Intelligence Agencies
Education
Consumers
Travelers
Corporate
Towing Companies
Mechanics
Car Owners
Store Staff
Digital Forensic Investigators
USES
Shields electronic devices
Stops remote hacking attacks
Reduces EMF exposure
Protects devices from EMP
DEFCON™ Vehicle + EMP Vehicle Protection Kit 2
Regular price
$720.00
Sale price
$640.00
Save $80.00
DESCRIPTION
Modern vehicles are heavily reliant on electronic components, controlling every aspect of the vehicle. An EMP’s intense and rapid electromagnetic field can induce powerful electrical currents and voltages in the vehicle’s wiring and delicate electronic components, leading to severe damage. This electromagnetic interference can result in critical system upsets and permanent failures, stalling the vehicle and even destroying its engine control unit.
An EMP can disrupt satellite navigation systems, cellular connectivity, and communication with emergency services, leaving occupants stranded and without crucial assistance. Because of this realistic threat, we have developed DEFCON™ Vehicle to act as a shield against an EMP for your vehicle. The idea behind it is simple. The DEFCON™ Vehicle is designed to limit the induced energy that would couple into your vehicle, keeping its electronics from becoming damaged, and ensuring the safety and working status of your vehicle.
The DEFCON™ Vehicle comes in a weatherproofed package with ring terminals for easy installation and attachment. The module is also internally waterproofed using a potting compound. The device uses automotive-grade wire, ring terminals, and marine-grade heat shrink tubing, and comes in a convenient form factor for use across the battery terminals.
The DEFCON™ Vehicle can be installed in tight spaces under the hood of your vehicle using the holes and mounting screws. The ring terminals fit most battery post bolt clamp screws. The 36″ long cables let you install it as close or as far away from your battery as needed.
Voltage: 12-15 volts DC
Current: 9 mA consumption typical
Surge Current:270,000 Amps total
Energy Rating: >2,000 Joules total
Turn-on Speed: <1 ns typical
Not for home use. Do not apply AC voltage.
Size: 4.5″ L x 3.375″ W x 1.875″ H
Three Wire: Positive, Negative, Ground
Questions & Answers:
What is DEFCON™ Vehicle?
The DEFCON™ Vehicle is an ultra-duty surge protection device specifically designed to protect a vehicle’s electronics from damaging electromagnetic energy resulting from an electromagnetic pulse (EMP). Constructed using state-of-the-art metal oxide varistor technology, the DEFCON™ Vehicle is capable of shunting away an incredible 270,000 amps of current! When combined with the lightning-fast Transient Reducing Auxiliary Plug (TRAP) products and high-saturation current-damping ferrites, the DEFCON™ Vehicle is the latest addition to the world’s first comprehensive EMP auto protection system.
How does DEFCON™ Vehicle Work?
DEFCON™ Vehicle protects your vehicle by shunting (shorting) the over voltage coming into your vehicle’s electrical system. DEFCON™ Vehicle will “see” the surge and react in less than 1 billionth of a second. Since the shunting is completed incredibly fast, the over voltage is drained away from the vehicle before the voltage can rise high enough to produce any damage.
Do I need a DEFCON™ Vehicle if I already have an EMP Vehicle Kit?
The DEFCON™ Vehicle is designed to be an excellent addition to the EMP Vehicle Kit. It offers approximately 400 times the energy absorption and more than 2,700 times the max surge current of the TRAP-B. It is also designed with different turn on characteristics to supplement the Vehicle Kit, as well as a power-on indicator to let the user know that it is still active.
Does the DEFCON™ Vehicle work as a stand alone product or as a replacement to the EMP Vehicle Kit?
Although DEFCON™ Vehicle is a supplemental device designed to be added to the current Auto Protection Kit, it would function just fine as a standalone device too. The TRAPs and DEFCON™ Vehicle device both provide transient protection, but each using different technologies. The TRAPs use super-fast TVS diodes, and the DEFCON™ Vehicle uses slightly less fast (but very hefty) metal-oxide varistors.
Is there anything the DEFCON™ Vehicle is able to block that the EMP Vehicle Kit can’t?
DEFCON™ Vehicle could protect against indirect lightning better than the EMP Vehicle Kit. It also protects from unwanted transients caused from vehicle malfunctions.
When using the DEFCON™ Vehicle and the EMP Vehicle Kit together, is it safe to double up at the battery location with DEFCON™ Vehicle and the TRAP-B?
Yes, it is perfectly safe for both to be hooked up to the battery at once.
For a diesel engine with two batteries, do I need two DEFCON™ Vehicle units?
Yes, we would recommend this, to ensure that both electrical systems are protected.
Does the DEFCON™ Vehicle work for solar flares and CME’s?
Contrary to popular thinking, solar flares and CME’s will not affect vehicles. CME’s produce very low frequencies and only couple into long conductors that are miles long. In the unlikely event that a CME were to couple radiated energy into a vehicle, the DEFCON™ Vehicle would offer protection.
Will the DEFCON™ Vehicle protect my vehicle from lightning?
The DEFCON™ Vehicle introduces transient that may shunt away energy from a lighting strike, preventing damage to the vehicle’s electronics.
Will a lightning strike or EMP destroy the DEFCON™ Vehicle, and is it reusable?
An EMP will not destroy the DEFCON™ Vehicle. A direct lightning strike will destroy pretty much anything, including the DEFCON™ Vehicle, however, this is extremely rare, as most lightning strikes are indirect and will not damage the device.
Will the indicator light on the DEFCON™ Vehicle drain my battery?
Most car peripherals try to limit their off-state current draw to under 15 milliamps. The DEFCON™ Vehicle indicator light draws 9 milliamps of current. Typical car batteries have around 55,000 milliamps-hours of capacity. Therefore, even if the vehicle sat for an entire month unused, the light would only draw off about 10% of the battery.
How do I mount the DEFCON™ Vehicle?
The DEFCON™ Vehicle attaches across a standard 12-volt automobile battery. Installation instructions will be included in the package, along with a link to a video of the installation process.
What does the indicator light mean?
The DEFCON™ Vehicle indicator light indicates that the unit is receiving power and therefore properly connected to the battery. If the unit is compromised, the indicator light will turn off.
Does the DEFCON™ Vehicle work even when my vehicle is turned off?
Yes, like the EMP Vehicle Kit, the DEFCON™ Vehicle is designed to protect both when the vehicle is on or off.
Is there a warranty on the DEFCON™ Vehicle?
The DEFCON™ Vehicle comes with a 10-year limited lifetime warranty.
Comparing TRAPs to DEFCON™Vehicle
TRAP
TRAP-B
DEFCON™Vehicle
Energy Absorption
5 Joules
5 Joules
>2,000 Joules
Surge Current
95 Amps
95 Amps
270,000 Amps
Protection Technology
TVS Diode
TVS Diode
MOV
Turn-on Speed
<1 ps typical
<1 ps typical
< 1 ns typical
Power-on Indicator
No
No
Yes
Installation
Plugs in auxiliary receptacle
Connects across battery terminals
Connects across battery terminal and to chassis, mounts to vehicle frame
Other recommended EMP Vehicle Protection devices:
EMP Vehicle Protection Kit 2
Regular price
$250.00
Save $-250.00
Vehicles are protected using three products: T.R.A.P. OBD2, T.R.A.P.-Bs, and High-saturation Car Ferrites
*The EMP Vehicle Protection Kit 2 uses an OBD2 plug instead of the Auxillary (cigarette lighter) plug.
The T.R.A.P.™ OBD2 Transient Reducing Auxiliary PlugThe T.R.A.P.™ (Transient Reducing Auxiliary Plug) OBD2 Edition is the ultimate transient protection device for your vehicle’s OBD2 port. With a powerful 5,000-watt transient voltage suppression device boasting a lightning-fast <1 picosecond turn-on time, the T.R.A.P.™ safeguards your vehicle against electrical transients with unmatched efficiency.
The T.R.A.P.™-Bcontains the same 5,000-watt transient voltage suppression device in a form that can be easily connected across a vehicle’s battery terminals.
High-saturation ferritescan be installed on the battery wires to reduce high-frequency current transients.
How can the T.R.A.P.™ be effective against an EMP when it’s so small? The danger to vehicles from an EMP is the high voltage that is introduced on the cables from E1 and E2. Those transient voltages are extremely brief in time (from nanoseconds to microseconds) and can therefore be suppressed using small devices. This is distinctly different than the case with homes, which would also experience a powerful E1 current surge from the power grid.
Can you use more than one T.R.A.P.™ in a vehicle? Absolutely. Putting energy “traps” at multiple points in your vehicle helps to better shunt away the unwanted energy. Maximum protection is achieved by using a T.R.A.P.™ in every auxiliary power outlet, as well as using the T.R.A.P.™-B across the vehicle’s battery.
Does a T.R.A.P.™ protect a vehicle when the vehicle is powered off? The T.R.A.P.™ provides transient protection even with the ignition switch turned off because interconnected cable assemblies can still receive damaging energy. The T.R.A.P.™ continues to act as a high-frequency energy sink when the vehicle is unpowered.
Will a T.R.A.P.™ or T.R.A.P.™-B drain my battery? T.R.A.P.™ products draw essentially zero current except when there is a significant overvoltage, so they will not drain your battery.
How do I change out the ring terminals on the T.R.A.P.-B? Below is a video showing how to swap the ring terminals on the T.R.A.P.-B.
How long will they last? The T.R.A.P.™ and T.R.A.P.™-B devices are designed to withstand any normal vehicle transient as well as a nuclear-generated EMP without damage.
Are these devices good quality? The T.R.A.P.™ and T.R.A.P.™-B devices are hand assembled in the US and constructed from the highest quality materials (see below).
T.R.A.P.™-The plug is made with bronze, nickel-plated negative contacts, gold-plated center contact, and Bakelite body. It is rated for 25 Amps continuous, much more than is needed for voltage transients. The transient voltage suppression component is ultra high reliability (AEC Q101 qualified), has a turn-on time of < 1 picosecond, and can suppress up to 5,000 Watts!
T.R.A.P.™-B– The weatherproof module is IP68 rated with integrated rubber o-rings, automotive-grade wire, copper terminals, and marine-grade heatshrink. It contains the same AEC Q101 qualified transient suppression device as the T.R.A.P.™ but in a more convenient form factor for use across the battery.
What are high-saturation ferrites? Ferrites are devices that clamp around power wires to reduce high-frequency current transients. Most ferrites will saturate and stop providing protection when more than a couple of amps flow through the wires. The custom-made, high-saturation, auto ferrites sold here are modified to allow significantly more current through the part before saturating. Watch the video below to better understand their function and installation.
JACKET Forensic Faraday Cell Phone Bag (4.5″ x 8″)
Regular price
$29.99
Save $-29.99
The JACKET Faraday Bag 4.5″ x 8″ keeps devices safe and secure by blocking Cell Signal, GPS, RFID, and WiFi, maintaining the devices’ integrity and preventing remote influences from accessing content. The JACKET offers >85 dB attenuation (400 MHz-4 GHz) with metal-plated CYBER NC (Nickel/Copper) fabric lining and a durable nylon canvas exterior. With precision stitching and a secure Velcro closure, the JACKET is designed for performance and endurance. This bag is sized to fit all major cell phone makes and models. See other listings for additional variations and sizes of privacy bags.
1pc XXX-Large NEST-Z 7.0 mil Heat Seal Faraday Bag (34" x 40")
Regular price
$69.99
Save $-69.99
The NEST-Z 7.0 mil Moisture Barrier 5-layer EMP bag is the highest-rated EMP bag on the market, making them ideal for packaging and transporting high-value, sensitive electronic parts, military equipment, and medical devices. With 11,500 PSI tensile strength, 33lb puncture resistance, and >40db EMI attenuation, this bag is highly effective. NEST-Z bags have been tested to meet or exceed electrical and physical requirements of ANSI/ESD S541 and to be ANSI/ESD S20.20 compliant. The bags are ROHS compliant and lead-free. NOTE: These bags are for EMP/HEMP/CME protection only, they do not provide shielding from cell signal, GPS, WiFi, etc.
The NEST-Z 7.0 mil Moisture Barrier 5-layer EMP bag is the highest-rated EMP bag on the market, making them ideal for packaging and transporting high-value, sensitive electronic parts, military equipment, and medical devices. With 11,500 PSI tensile strength, 33lb puncture resistance, and >40db EMI attenuation, this bag is highly effective. NEST-Z bags have been tested to meet or exceed electrical and physical requirements of ANSI/ESD S541 and to be ANSI/ESD S20.20 compliant. The bags are ROHS compliant and lead-free.
NOTE: These bags are for EMP/HEMP/CME protection only, they do not provide shielding from cell signal, GPS, WiFi, etc.
Description
The Faraday Defense NEST-Z EMP Bag is designed to protect electronics against harmful electromagnetic radiation and electrical currents that would otherwise destroy it. Aluminum layers provide a static-safe environment for sensitive electronic devices. Strong, heavy-gauge, polyester layers help prevent sharp objects from puncturing and destroying the bags effectiveness. The NEST-Z bag is heat-sealable and suitable for vacuum packing.
Material 2 Heavy-gauge, static-dissipating polyester layers 2 Aluminum barrier shield layers 1 Additional polyester inner layer for added strength
Product Details 33 lb puncture resistance (FTMS 101-C, 2065.1) 11,500 PSI tensile strength >50 dB EMI attenuation (MIL-PFR-81705-REV.D) ANSI/ESD S20.20 compliant 12 Ohms / Sq. In. surface resistance (ASTM 1-257) RoHS compliant and lead-free Made in USA
Heat Sealing Conditions Temperature (400 degrees F, 204 degrees C) Time (.6 to 4.5 seconds) Pressure (30 70 PSI, 206-482 kPa)
Universal Shielding Designed for universal shielding of all laptops, tablets, cell phones, key fobs, credit cards, small hard drives and USB drives.
All statements, technical information, and recommendations related to Faraday Defenses products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in Faraday Defenses current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of Faraday Defense.
Faraday Defense will not be liable for any indirect, special, incidental or consequential loss or damage arising from this product, regardless of the legal theory asserted.
3pc Cell Phone NEST-Z 7.0 mil Faraday Bags 5" x 7"
Regular price
$24.99
Save $-24.99
The NEST-Z 7.0 mil Moisture Barrier 5-layer EMP bag is the highest-rated zip-lock closure EMP bag on the market, making them ideal for packaging and transporting high-value, sensitive electronic parts, military equipment, and medical devices. With 11,500 PSI tensile strength, 33lb puncture resistance, and >40db EMI attenuation, this bag is highly effective. NEST-Z bags have been tested to meet or exceed electrical and physical requirements of ANSI/ESD S541 and to be ANSI/ESD S20.20 compliant. The bags are ROHS compliant and lead-free. NOTE: These bags are for EMP/HEMP/CME protection only, they do not provide shielding from cell signal, GPS, WiFi, etc.
The NEST-Z 7.0 mil Moisture Barrier 5-layer EMP bag is the highest-rated zip-lock closure EMP bag on the market, making them ideal for packaging and transporting high-value, sensitive electronic parts, military equipment, and medical devices. With 11,500 PSI tensile strength, 33lb puncture resistance, and >40db EMI attenuation, this bag is highly effective. NEST-Z bags have been tested to meet or exceed electrical and physical requirements of ANSI/ESD S541 and to be ANSI/ESD S20.20 compliant. The bags are ROHS compliant and lead-free.
NOTE: These bags are for EMP/HEMP/CME protection only, they do not provide shielding from cell signal, GPS, WiFi, etc.
Description
The Faraday Defense NEST-Z EMP Bag is designed to protect electronics against harmful electromagnetic radiation and electrical currents that would otherwise destroy it. Aluminum layers provide a static-safe environment for sensitive electronic devices. Strong, heavy-gauge, polyester layers help prevent sharp objects from puncturing and destroying the bags effectiveness. The NEST-Z bag is heat-sealable and suitable for vacuum packing.
Material 2 Heavy-gauge, static-dissipating polyester layers 2 Aluminum barrier shield layers 1 Additional polyester inner layer for added strength
Product Details 33 lb puncture resistance (FTMS 101-C, 2065.1) 11,500 PSI tensile strength >50 dB EMI attenuation (MIL-PFR-81705-REV.D) ANSI/ESD S20.20 compliant 12 Ohms / Sq. In. surface resistance (ASTM 1-257) RoHS compliant and lead-free Made in USA
Heat Sealing Conditions Temperature (400 degrees F, 204 degrees C) Time (.6 to 4.5 seconds) Pressure (30 70 PSI, 206-482 kPa)
Universal Shielding Designed for universal shielding of all laptops, tablets, cell phones, key fobs, credit cards, small hard drives and USB drives.
All statements, technical information, and recommendations related to Faraday Defenses products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in Faraday Defenses current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of Faraday Defense.
Faraday Defense will not be liable for any indirect, special, incidental or consequential loss or damage arising from this product, regardless of the legal theory asserted.
DEFCON™ - EMP Alert System
Regular price
$179.99
Save $-179.99
If an electromagnetic pulse (EMP) occurs, most people will remain completely unaware. Only as they discover that many of their modern electronics stopped functioning, will they begin to suspect that something is wrong. The DEFCON™ is designed to detect electrical disturbances resulting from an electromagnetic pulse or a solar coronal mass ejection (CME). This device monitors the power lines and ambient air for damaging disturbances. Once detected, the DEFCON™ provides audible warnings so that additional protective steps can be taken, such as opening the main circuit breaker to prevent home damage.
DESCRIPTION
What is DEFCON™?
The DEFCON™ is the first low-cost device designed to detect electrical disturbances resulting from an electromagnetic pulse (EMP) or a solar coronal mass ejection (CME). The DEFCON™ plugs into any standard 120-volt AC receptacle and draws less than 50 milliamps of current, about the same as a 5-watt nightlight.
How doesEMP ALERT™ detect E1, E2 and E3 of an EMP/CME?
E1 and E2 are detected by a very high-speed circuit capable of detecting electromagnetic disturbances as brief as nanoseconds in duration. E3 is detected by a circuit that continuously monitors the power lines.
How doesDEFCON™ warn of an EMP/CME?
The DEFCON™ provides three distinct audible alarms:
(1) a brief ‘beep’ when a very fast E1/E2-type pulse is detected
(2) a long sustained ‘beeeeep’ when an E3 overvoltage condition is detected
(3) a pulsating ‘beep-beep-beep’ when an E3-induced undervoltage condition is detected.
Red lights also become visible when any detection occurs.
Won’t I already know if an EMP/CME occurs?
Most people will have no way of knowing when an EMP or CME is occurring. In the case of an EMP, the detonation is so high in the atmosphere that it’s unlikely that you will see a flash or hear an explosion. Likewise, while we have warning of an approaching CME, there is no way to predict its effects on our power lines.
What good is it knowing that an EMP or CME is occurring?
Knowing that voltage levels are becoming dangerously high (or low) gives you time to quickly open the main breaker on your home or business. Also, you can warn others in your family or preparedness network, as well as shore up your supplies or consider evacuation.
Won’t an EMP immediately take down the power grid?
The E1/E2 pulses are unlikely to immediately take down the power grid. Rather, it is the sustained E3 energy that drives large currents around the grid, damaging transformers and other infrastructure elements. The DEFCON™ is designed to give you time to take action while E3 is just beginning.
If I already have whole-house surge protection, do I still need an DEFCON™?
Surge protection devices protect from powerful E1 and E2 conducted transients but not sustained E3 energy. The DEFCON™ complements protection devices by warning you before E3-induced voltages become dangerously high, allowing you time to open your main breaker.
Will the DEFCON™ be destroyed by an EMP or CME?
The DEFCON™ is internally hardened with protective devices to help it survive a powerful electromagnetic disturbance, such as an EMP or CME. It also does not contain any digital electronics.
Unique Features of DEFCON™
Warns of both EMP and CME disturbances
Detects high-frequency impulse resulting from E1/E2
Detects out-of-spec line voltage resulting from E3
Monitors power lines for conducted effects and ambient air for radiated effects
Sound 85 dB alarm – unique alarms for different conditions
Hardened analog design – no digital electronics to be zapped
Plugs into standard 120-volt AC receptacle
Draws about the same power as a 5-watt light bulb
Designed and manufactured in the USA
Two DEFCON™ Vehicles + EMP Diesel Vehicle Protection Kit
Regular price
$1,370.00
Sale price
$1,180.00
Save $190.00
The DEFCON™ Vehicle is an ultra-duty surge protection device specifically designed to protect a vehicle’s electronics from damaging electromagnetic energy resulting from an electromagnetic pulse (EMP). Constructed using state-of-the-art metal oxide varistor technology, the DEFCON™ Vehicle is capable of shunting away an incredible 270,000 amps of current! When combined with the lightning-fast Transient Reducing Auxiliary Plug (TRAP) products and high-saturation current-damping ferrites, the DEFCON™ Vehicle is the latest addition to the world’s first comprehensive EMP auto protection system. This kit contains two DEFCON™ Vehicle units to support both battery systems in a diesel engine. The DEFCON™ Vehicle is made in the USA and constructed from the highest quality materials.
The EMP Diesel Vehicle Protection Kit is a combination of the different vehicle protection devices. Diesel vehicles typically have two batteries which require added protection, and this kit will protect both battery systems. Use these on your vehicle to protect it from transients-like load changes, lightning strikes, conducted transients, and an EMP.
This bundle includes: 2 DEFCON™ Vehicles, 1 T.R.A.P., 2 T.R.A.P.-B’s, and 4 Vehicle Ferrites. Save money when you purchase these parts together. This bundle is for ONE diesel vehicle.
Selling Fast!
Modern vehicles are heavily reliant on electronic components, controlling every aspect of the vehicle. An EMP’s intense and rapid electromagnetic field can induce powerful electrical currents and voltages in the vehicle’s wiring and delicate electronic components, leading to severe damage. This electromagnetic interference can result in critical system upsets and permanent failures, stalling the vehicle and even destroying its engine control unit.
An EMP can disrupt satellite navigation systems, cellular connectivity, and communication with emergency services, leaving occupants stranded and without crucial assistance. Because of this realistic threat, we have developed DEFCON™ Vehicle to act as a shield against an EMP for your vehicle. The idea behind it is simple. The DEFCON™ Vehicle is designed to limit the induced energy that would couple into your vehicle, keeping its electronics from becoming damaged, and ensuring the safety and working status of your vehicle.
The DEFCON™ Vehicle comes in a weatherproofed package with ring terminals for easy installation and attachment. The module is also internally waterproofed using a potting compound. The device uses automotive-grade wire, ring terminals, and marine-grade heat shrink tubing, and comes in a convenient form factor for use across the battery terminals.
The DEFCON™ Vehicle can be installed in tight spaces under the hood of your vehicle using the holes and mounting screws. The ring terminals fit most battery post bolt clamp screws. The 36″ long cables let you install it as close or as far away from your battery as needed.
Voltage: 12-15 volts DC
Current: 9 mA consumption typical
Surge Current: 270,000 Amps total
Energy Rating: >2,000 Joules total
Turn-on Speed: <1 ns typical
Not for home use. Do not apply AC voltage.
Size: 4.5″ L x 3.375″ W x 1.875″ H
Three Wire: Positive, Negative, Ground
Questions & Answers:
What is DEFCON™ Vehicle?
The DEFCON™ Vehicle is an ultra-duty surge protection device specifically designed to protect a vehicle’s electronics from damaging electromagnetic energy resulting from an electromagnetic pulse (EMP). Constructed using state-of-the-art metal oxide varistor technology, the DEFCON™ Vehicle is capable of shunting away an incredible 270,000 amps of current! When combined with the lightning-fast Transient Reducing Auxiliary Plug (TRAP) products and high-saturation current-damping ferrites, the DEFCON™ Vehicle is the latest addition to the world’s first comprehensive EMP auto protection system.
How does DEFCON™ Vehicle Work?
DEFCON™ Vehicle protects your vehicle by shunting (shorting) the over voltage coming into your vehicle’s electrical system. DEFCON™ Vehicle will “see” the surge and react in less than 1 billionth of a second. Since the shunting is completed incredibly fast, the over voltage is drained away from the vehicle before the voltage can rise high enough to produce any damage.
Do I need a DEFCON™ Vehicle if I already have an EMP Vehicle Kit?
The DEFCON™ Vehicle is designed to be an excellent addition to the EMP Vehicle Kit. It offers approximately 400 times the energy absorption and more than 2,700 times the max surge current of the TRAP-B. It is also designed with different turn on characteristics to supplement the Vehicle Kit, as well as a power-on indicator to let the user know that it is still active.
Does the DEFCON™ Vehicle work as a stand alone product or as a replacement to the EMP Vehicle Kit?
Although DEFCON™ Vehicle is a supplemental device designed to be added to the current Auto Protection Kit, it would function just fine as a standalone device too. The TRAPs and DEFCON™ Vehicle device both provide transient protection, but each using different technologies. The TRAPs use super-fast TVS diodes, and the DEFCON™ Vehicle uses slightly less fast (but very hefty) metal-oxide varistors.
Is there anything the DEFCON™ Vehicle is able to block that the EMP Vehicle Kit can’t?
DEFCON™ Vehicle could protect against indirect lightning better than the EMP Vehicle Kit. It also protects from unwanted transients caused from vehicle malfunctions.
When using the DEFCON™ Vehicle and the EMP Vehicle Kit together, is it safe to double up at the battery location with DEFCON™ Vehicle and the TRAP-B?
Yes, it is perfectly safe for both to be hooked up to the battery at once.
For a diesel engine with two batteries, do I need two DEFCON™ Vehicle units?
Yes, we would recommend this, to ensure that both electrical systems are protected.
Does the DEFCON™ Vehicle work for solar flares and CME’s?
Contrary to popular thinking, solar flares and CME’s will not affect vehicles. CME’s produce very low frequencies and only couple into long conductors that are miles long. In the unlikely event that a CME were to couple radiated energy into a vehicle, the DEFCON™ Vehicle would offer protection.
Will the DEFCON™ Vehicle protect my vehicle from lightning?
The DEFCON™ Vehicle introduces transient that may shunt away energy from a lighting strike, preventing damage to the vehicle’s electronics.
Will a lightning strike or EMP destroy the DEFCON™ Vehicle, and is it reusable?
An EMP will not destroy the DEFCON™ Vehicle. A direct lightning strike will destroy pretty much anything, including the DEFCON™ Vehicle, however, this is extremely rare, as most lightning strikes are indirect and will not damage the device.
Will the indicator light on the DEFCON™ Vehicle drain my battery?
Most car peripherals try to limit their off-state current draw to under 15 milliamps. The DEFCON™ Vehicle indicator light draws 9 milliamps of current. Typical car batteries have around 55,000 milliamps-hours of capacity. Therefore, even if the vehicle sat for an entire month unused, the light would only draw off about 10% of the battery.
How do I mount the DEFCON™ Vehicle?
The DEFCON™ Vehicle attaches across a standard 12-volt automobile battery. Installation instructions will be included in the package, along with a link to a video of the installation process.
What does the indicator light mean?
The DEFCON™ Vehicle indicator light indicates that the unit is receiving power and therefore properly connected to the battery. If the unit is compromised, the indicator light will turn off.
Does the DEFCON™ Vehicle work even when my vehicle is turned off?
Yes, like the EMP Vehicle Kit, the DEFCON™ Vehicle is designed to protect both when the vehicle is on or off.
Is there a warranty on the DEFCON™ Vehicle?
The DEFCON™ Vehicle comes with a 10-year limited lifetime warranty.
Comparing TRAPs to DEFCON™ Vehicle
TRAP
TRAP-B
DEFCON™ Vehicle
Energy Absorption
5 Joules
5 Joules
>2,000 Joules
Surge Current
95 Amps
95 Amps
270,000 Amps
Protection Technology
TVS Diode
TVS Diode
MOV
Turn-on Speed
<1 ps typical
<1 ps typical
< 1 ns typical
Power-on Indicator
No
No
Yes
Installation
Plugs in auxiliary receptacle
Connects across battery terminals
Connects across battery terminal and to chassis, mounts to vehicle frame
EMP Diesel Vehicle Protection Kit
Regular price
$490.00
Sale price
$420.00
Save $70.00
There are many reasons you may drive a diesel. In a survival situation, a vehicle with better mileage, a typically longer lifespan, and more towing power is more than worth its weight in gold. Diesel vehicles typically have two batteries which require added protection. This kit provides that protection and ensures that your diesel will be an extremely useful tool and vehicle in the after-effects of a EMP disaster. Use this kit on your vehicle to protect it from transients-like load changes, lightning strikes, conducted transients, and even an EMP. Save money when you purchase these parts together. Parts are also sold individually.
Vehicles are protected using three products: T.R.A.P. OBD2, T.R.A.P.-Bs, and High-saturation Car Ferrites
The T.R.A.P.™ OBD2 Transient Reducing Auxiliary Plug is the ultimate transient protection device for your vehicle’s OBD2 port. With a powerful 5,000-watt transient voltage suppression device boasting a lightning-fast <1 picosecond turn-on time, the T.R.A.P.™ safeguards your vehicle against electrical transients with unmatched efficiency.
The T.R.A.P.™-B contains the same 5,000-watt transient voltage suppression device in a form that can be easily connected across a vehicle’s battery terminals.
High-saturation ferrites can be installed on the battery wires to reduce high-frequency current transients.
Most diesel vehicles have an extra battery, so their requirements for EMP protection are slightly more than the regular car. A normal gas vehicle uses our EMP Vehicle kit with 1 T.R.A.P., 1 T.R.A.P.-B, and 2 ferrites. Because of the extra battery, the diesel kit has an extra T.R.A.P.-B and 2 extra ferrites. The total amount of items in this kit is 7, as opposed to 4 for a regular car.