Hoplite Body Armor Mark II Carrier

Our Mark II carrier is designed to hold any size SAPI or Swimmer plates. Just match carrier size to your preferred plate size.

The 3 band MOLLE cummerbund is designed for minimal bulk and quick adjustment. Compatible with most industry standard placards and cummerbunds. Based on the most popular platform configuration. Designed specifically with the users needs in mind.

Add the Laser Cut Placard to attach MOLLE pouches to the front of the Mark II carrier. 

Ships VIA UPS Ground.

• Dimensions: W:15" H:13.5" D:2"
• Weight: 2 lbs, 9.91 oz

Designed to hold Small, Medium or Large, SAPI or Swimmer Plates

Includes Carrier Only. Accessories and Plates sold separately.

Some popular items/sizes may incur a 4-8 week lead time. 

Hoplite Armor III+ Dangler Pouch Plates

Level III+ Groin Plate

NOW AVAILABLE IN 4 CARRIER COLOR OPTIONS

Hoplite Armor is known for being the industry leader in body armor design and development. Our line of extremity protection plates have set a new standard in the world of personal protection and our NEW Level III+ Groin Plates are no exception.

Designed using advanced polymer based armor materials, the Groin plate in thin, light, easy to wear and highly capable. This plate can stop numerous rounds of all Level III threats and beyond.

The standard strategy in close quarters combat has changed from "shooting center mass" to "aiming for the hips". Center mass is of course the largest target, but with armor having become so prevalent, the modern mindset is to aim for the second largest target which is the hips. When worn with our Femoral and Dangler Plates this adds a level of protection unseen anywhere else and provides protection against modern combat tactics unavailable through any other source.

Designed to fit any belt. Quick release buckles allow for easy integration and use with any platform.

We currently have a limited number of these available. Groin Plates are In Stock and the Carriers are in the final phase of production now. ETA at our warehouse is 1/30/2023 or sooner. Be one of the first to get access to this groundbreaking new technology.

Order yours today. Some popular items/sizes may have a 4-8 week lead time. 

SPECS

Nominal Weight and Dimensions 4.8" x 7.8" / .5 lbs

III+ Femoral Plates (19520)

Hoplite Armor is the world leader in advanced body armor design and our New III+ Femoral Plates are no exception. Designed to provide frontal protection to the femoral arteries, a common source of life threatening injuries. Use in conjunction with our Hard Armor Shoulder Plate system in order to maximize protection to the extremities.

Multicurve shapes match the geometry of the human body in order to maximize surface area contact thereby reducing wear stress and fatigue, allowing the system to be worn for long periods of time in any environment.

The unique laser cut carrier design is made using Squadron polymer laminate fabric resulting in an extremely durable, simple, lightweight plate carrier system. The minimalistic design prevents tenting on the backside of the plate in order allow for a seamless fit. 

Can also be worn under clothing using standard compression fit Football Pad Girdles such as the one shown in our image carousel. We strongly recommend this carrier type for use in a concealed armor configurations.

Lightweight and highly ergonomic, this system attaches to a standard 1.75” MOLLE battle belt allowing the system to move with the wearers body without hindering the natural range of motion. 1 vertical support and 2 lateral elastic supports comfortably maintain the position of each plate even under the harshest conditions. 

• Lightweight, only 1 pound per plate
• Thin plates, less than .6" thick
• Kit includes 2x 6"x10" III+ Hard Armor Plates and Carrier
• Highly ergonomic, designed in 3D to match the geometry of the human body
• Made from Buoyant polymer armor materials
• Protects the lower extremities against frontal impacts
• Stops a wide range of rifle ammunition (Level III plus 7.62x39 MSC)
• Multi-hit, edge to edge protection
• Zero spall, polymer armor absorbs rounds on impact
• Made in the USA by LTC exclusively for Hoplite Armor

Some popular sizes/items may require a 4-10 week lead time.  

Rounds Defeated:  

Question? Call 855-ARMOR-01

IIIA Femoral Plates (19522)

Hoplite Armor is the world leader in advanced body armordesign and our New IIIA Femoral Plates are no exception. Designed to provide frontal protection to the femoral arteries, a common source of life threatening injuries. Use in conjunction with our Hard Armor Shoulder Plate system in order to maximize protection to the extremities.

Multicurve shapes match the geometry of the human body in order to maximize surface area contact thereby reducing wear stress and fatigue, allowing the system to be worn for long periods of time in any environment.

The unique laser cut carrier design is made using Squadron polymer laminate fabric resulting in an extremely durable, simple, lightweight plate carrier system. The minimalistic design prevents tenting on the backside of the plate in order allow for a seamless fit. 

Can also be worn under clothing using standard compression fit Football Pad Girdles such as the one shown in our image carousel. We strongly recommend this carrier type for use in a concealed armor configurations.

Lightweight and highly ergonomic, this system attaches to a standard 1.75” MOLLE battle belt allowing the system to move with the wearers body without hindering the natural range of motion. 1 vertical support and 2 lateral elastic supports comfortably maintain the position of each plate even under the harshest conditions. 

• Lightweight, only 11 ounces per plate
• Thin plates, less than .375" thick
• Kit includes 2x 6"x10" IIIA Hard Armor Plates and Carrier
• Highly ergonomic, designed in 3D to match the geometry of the human body
• Made from Buoyant polymer armor materials
• Protects the lower extremities against frontal impacts
• Stops a wide range of ammunition up to 44 Magnum (see attached test report)
• Multi-hit, edge to edge protection
• Zero spall, polymer armor absorbs rounds on impact
• Made in the USA by LTC exclusively for Hoplite Armor

Some popular sizes/items may require a 4-10 week lead time. 

RESTRICTED, CIVILIAN USE ONLY

Question? Call 855-ARMOR-01

Laser Cut Placard System (T3-Placard)

Add pouches to the front your Mark II Plate Carrier with this sleek Laser Cut placard. It clips into the female buckles on the front of the carrier and attaches by velcro onto the cummerbund for extra stability. Utilize the 3 rows and 6 columns of MOLLE to customize set up.

• 1”  male Fastex buckles
• Durable Squadron laminate construction
• H:6” W:9” D:1/8”
• Weight: 1oz

M4 Triple Mag Pouch Laser Cut

This pouch is an update to our original Triple Shingle. It is just as reliable, and secure, with a stiffer fabric making re-indexing magazines much easier.

• Sized to accommodate Three M4 Style 30rd Magazines side by side 
• Laser Cut Squadron construction reduces bulk and eliminates the need for additional MOLLE Webbing.
• Laser Cut sections are equivalent to 3 rows of Molle
• Multiple bungee routing options for additional magazine retention.
• Rubberized fabric helps to further secure the magazines
• Can be stacked one on top of another
• Dimensions: W:9” H:5” D:1”
• Weight: 4.9oz

Rogue 3.0 Plate / Carrier Combo

The Hoplite Armor Rogue Plate / Carrier Combo 

This kit includes the Rogue 3.0 Carrier and a set of either 26605-17 (Small) or 26605-18 (Medium) NIJ 06 Certified Level IV Plates. Fits most people between 120-180 lbs.

The 26605 is a Triple-curve hard armor, Multi-Hit, Stand Alone, SAPI plate certified under the NIJ 0101.06 Level IV Standard. Manufactured from high-density, reinforced alumina ceramic core (Al2O3) backed with lightweight layered polymer composite fiber and finished in a black Cordura Nylon Covering.

A foam pad is affixed to the Strike Face in order to protect against severe and repeated drops. NIJ standards require 2 drops. These plates must pass the internal 10 drop test and are inspected via X-Ray prior to environmental and ballistic testing.

The Rogue carrier is made from high strength Laser Cut Composite Laminate Fabric, and uses Top Quality Webbing and our Loop Fastening System. The Rogue isd sleek, slim, highly capable and concealable jackets of windbreakers.

 Features

• 100% MADE IN THE USA
• NIJ Certified
• Multi-Curve
• Multi-Hit
• 1 piece body construction 
• Unparalleled strength 
• Minimalistic design
• Only 13 lbs total
• Loop Fastening System
  
• Integrated LC MOLLE 
• Wide range size adjustability 
• Highly durable 
• Concealable 

Specs:

Fits Small and Medium Swimmer and SAPI Plates

The sturdiest and most simplistic Laser Cut Carrier ever developed. Ideal for high speed or covert applications. Easily concealed with only a windbreaker

Some popular items/sizes may incur a 4-8 week lead time. 

NIJ 06 Certified Level III+ Swimmer / SAPI Plate Combo (23620)

~SOLD IN PAIRS~

The Swimmer / SAPI Combo provides the ideal configuration for most body types and fits 95% of the population based on military size specifications. The Swimmer Plate in front provides an extended range of motion and the SAPI Plate in the back provides maximum coverage. All in a VERY LIGHTWEIGHT, positively bouyant, Multi-Hit, Multi-Curve, NIJ 06 Certified Rifle Rated platform.

These Multi Curve NIJ 06 Certified Level III(+) plates are manufactured from Ultra High Molecular Weight Polyethylene and are capable of stopping multiple hits of all Level III rounds plus 7.62x39 mild steel core.

Finished in Black Line-X. Foam pad on the back to reduce blunt force impact trauma.

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply. 

Some popular items/sizes may incur a 4-8 week lead time.  

SPECS

Rounds Defeated:  

Materials
Ultra High Molecular Weight Polyethylene *Dyneema
Covered in Black Line-X

Hoplite Armor Dangler Pouch  

Laser Cut Shoulder HASP Plate Carrier

The unique laser cut carrier design is made using Squadron polymer laminate fabric resulting in an extremely durable, simple, lightweight plate carrier system. The minimalistic design prevents tenting on the backside of the plate in order allow for a seamless fit. 

Lightweight and highly ergonomic, this system attaches to a standard shoulder strap allowing the system to move with the wearers body without hindering the natural range of motion. 1 vertical support and 2 lateral elastic supports comfortably maintain the position of each plate even under the harshest conditions. 

• Kit includes 1 x Laser Cut Carriers (Not a set)

Some popular sizes/items may require a 4-10 week lead time.  

Question? Call 855-ARMOR-01

Hoplite Armor III+ Dangler Pouch Plates