The Complete EMP protection kit offers ultimate security with a 55L Faraday Dry Duffel Bag. It secures your laptops, tablets, and radios during travel.

Three layers of premium CYBER NC line the bag interior for full RF shielding. The 55L duffel measures 25” L x 10” W x 14” H for high-capacity storage.

This heavy-duty bag ensures mission-critical hardware remains offline. It prevents signal leaks while providing a rugged, waterproof exterior for any environment.

Designed for Efficient Signal Blocking

• Blocks Bluetooth, Wi-Fi, Cell, GPS and RFID
• Dissipates signals from interior and exterior sources
• Protects devices from hacking and tracking
• >85 dB attenuation (400 MHz-40 GHz)

Secure Efficiency with a Complete EMP protection kit

EMP Home Protection Kit: 3 House Ferrites + Siemens Boltshield FSPD140 Level 2: Protect your residence with our shielding kit.

This kit includes a Siemens Boltshield and 3 House Ferrites for lightning protection. Install this setup on your breaker box for maximum safety.

These components work together to effectively mitigate risks from surges. They prevent high-voltage pulses from entering through utility lines.

Whole House Ferrites: These custom ferrites use high-frequency material. They prevent high-current saturation across main electrical wires.

Most homes require three ferrites for full coverage. They suppress high-frequency noise and transients before they reach sensitive appliances.

Siemens Boltshield FSPD140 Level 2: Protecting your shop from EMP threats is critical. This defensive setup offers 140,000 Amps of surge capacity.

This commercial-class unit stops surges before they enter. Notification diagnostics alert you when replacement is needed to ensure constant safety.

EMP Vehicle Protection Kit: This Complete EMP protection kit module shields your car from transients like lightning or load changes.

The bundle includes one T.R.A.P., one T.R.A.P.-B, and two Vehicle Ferrites. These parts safeguard automotive computers and sensors from failure.

The T.R.A.P.™ is a transient protection device that plugs into your 12-Volt auxiliary receptacle. It features a rapid turn-on time under 1 picosecond.

This fast response is essential for blocking E1 pulses. It ensures your vehicle electronics remain functional during a high-altitude event.

The T.R.A.P.™-B installs across vehicle battery terminals. It uses a 5,000-watt suppression device to add a secondary layer of defense.

High-saturation ferrites reduce high-frequency transients on battery wires. They stabilize systems during solar events or magnetic disturbances.

DEFCON™ Vehicle: The DEFCON Vehicle is an ultra-duty surge protector. This heavy-duty part shunts 270,000 amps to protect engine control units.

Modern electronics rely on this shield to stay operational. Without protection, microcircuits are vulnerable to permanent high-voltage damage.

An EMP can disrupt navigation and cellular systems. The DEFCON™ Vehicle acts as a vital shield to limit induced energy and ensure vehicle safety.

It uses automotive-grade wire and waterproof potting. Each package ensures your mobility survives extreme environmental stressors.

Voltage: 12-15 volts DC

Current: 9 mA consumption typical

Surge Current: 270,000 Amps total

Energy Rating: >2,000 Joules total

Turn-on Speed: <1 ns typical

Size: 4.5″ L x 3.375″ W x 1.875″ H

Wires: Positive, Negative, Ground

Wire Length: 36″

DEFCON™ EMP Alert System: This system detects solar CME and EMP pulses efficiently. It monitors power lines and ambient air for surges.

It provides audible warnings for home protection steps. This awareness allows you to disconnect sensitive equipment before damage can occur.

The DEFCON™ plugs into any 120-volt AC receptacle. It draws power like a 5-watt nightlight for continuous 24/7 monitoring of the grid.

This unit serves as your primary early warning sensor. It operates silently until a threat is detected, ensuring peace of mind indoors.

How does DEFCON™ EMP Alert System warn of an EMP/CME?

The DEFCON™ provides three distinct audible alarms:

• (1) a brief ‘beep’ for E1/E2-type pulses
• (2) a sustained ‘beeeeep’ for E3 overvoltage
• (3) a pulsating ‘beep-beep-beep’ for E3 undervoltage

Red lights also become visible when any detection occurs. This feedback provides immediate awareness in any emergency scenario.