Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System
Ops-Core FAST XP High Cut Helmet System

Ops-Core FAST XP High Cut Helmet System

$1,820.95 Save $-1,820.95
0 in stock

The FAST XP provides pistol round protection for higher velocity 9mm rounds. with a slightly thicker shell than the SF, the XP offers a gain in protection: 205 ft/s increase in muzzle velocity for a 124g 9mm round in exchange for an increase of 0.28 lbs. in shell weight.

Key Features

  • Lightweight Modular Bungee Shroud (MBS) reduces snag hazards and features carabiner clips to improve NVG retention and stability while reducing interference with other rail-mounted accessories
  • PowerPath ARC Rail system provides a lightweight mounting solution for OpsCore headborne ecosystems
  • Vented Lux Liner with Occ-Dial Universal Fitband offers comfort and ventilation
  • Head-Loc retention chinstrap maintains security and stability
  • External VELCRO Brand loop kit allows for quick and easy attachment and detachment of headborne accessories
  • Proprietary recessed groove accommodates over-the-head communication accessories with no interference and allows for helmet donning and doffing without headset removal

 

Features and Specifications

Suspension & Retention Options

  • Vented Lux Liner with Low Profile OCC-Dial and Head-Loc Retention System

Testing Protocols & Design

  • Performance Specification: In accordance with Gentex PS-1063 Specification, Modified and Abbreviated US Army ACH Helmet CO/PD 05-04:2007 Specification
  • NIJ Standards: NIJ 0106.01 with NIJ 0108.01 Level IIIA (9mm FMJ @ 1,400 ft/s) Threat Fragmentation Protection: In accordance with PS-1063 and MIL-STD-662F
  • 9mm Protection: In accordance with PS-1063, Resistance to Penetration (RTP) and Backface Defamation
  • (BFD): 9mm FMJ, 24gr FMJ at 1,400 ft/s (426 m/s) at 0 obliquity with BFD < 1.0 inch (25.4 mm) (Right, Left, Crown, Front and Back)
  • Blunt Impact Protection: <150 Gs at 10 ft/s per ACH CO/PD 05-04:2007
  • Compression Testing: Top-Bottom = .020 (0.51 mm) Max @ 400 lbs. (181.44 kg), Side-Side = .125 (3.18 mm) Max @ 300 lbs. (136.08 kg) per MICH Type II FQ/PD 06-35C: 2013
  • Environmental Resistance: Temperature -Storage and Operating at Ambient, Cold -60 F (-51 C), and Hot +160 F (71 C), Temperature Shock, Flame Resistance, Altitude, Vibration, Seawater, Field Agent Resistance, Weatherometer per ACH CO/PD 05-04:2007

The Ops-Core FAST XP helmet is part of the FAST ballistic protection helmet family. Its innovative, lightweight design resists penetration from 9mm and frag threats at a weight of 2.81lbs (Large). The FAST XP integrates into Ops-Cores total headborne system solutions, which include situational awareness, optics, and respiratory protectionThe Ops-Core FAST XP helmet is part of the FAST ballistic protection helmet family. Its innovative, lightweight design resists penetration from 9mm and frag threats at a weight of 2.81lbs (Large). The FAST XP integrates into Ops-Cores total headborne system solutions, which include situational awareness, optics, and respiratory protection

Restrictions

Restrictions on the Purchase, Ownership, or Possession of Body Armor are as follows:

It is a violation of United States Federal Law for a person convicted of a violent felony to purchase, own, or possess body armor. In addition, various states also have enacted legislation restricting the purchase, ownership, or possession of body armor by persons convicted of drug crimes, certain other felonies, or other violent crimes. By purchasing body armor from Hoplite Armor, LLC you acknowledge and certify that:

  1. You have not been convicted of a felony.
  2. The end user has not been convicted of any other crime that would restrict their ability to purchase, own, or possess body armor under any applicable Local, State, or Federal law ordinance or restriction.
  3. The end user will not use any body armor purchased from Hoplite Armor, LLC for any criminal purpose.
  4. The end user is over the age of 18.
  5. The end user will not transport or use any Hoplite Armor products outside of the United States.

Hoplite Armor, LLC reserves the right, in its sole discretion, to refuse the sale of body armor to any person or entity. Additionally, the online sale of body armor to residents of Connecticut and NY is strictly prohibited, unless the sale is made to certain law enforcement or military personnel, or through a face-to-face transaction.

Hoplite Armor does not ship any products outside of the United States in compliance with ITAR regulations. By purchasing, owning, or possessing Hoplite Armor systems, the end user certifies that no Hoplite Armor products will be transported or used outside of the United States.

All statements contained herein, or in any other related Hoplite publication of any kind, are not designed to provide legal counsel in any way, shape or form. It is strongly recommended that customers conduct a reasonable amount of Due Diligence prior to purchasing, owning or possessing body armor in order to avoid any legal ramifications.

***DUE TO THE LIFE-SAVING NATURE OF ARMOR PRODUCTS, ALL SALES ARE FINAL***

Hoplite Armor Lifetime Body Armor Warranty Terms and Conditions:

Hoplite Armor LLC stands behind the reliability and quality of the products we sell. In the unfortunate event that you are shot while wearing products purchased from us, we will replace damaged equipment at no cost to you at any time, as long as a valid police report is provided. This covers all of our body armor products, which includes Body Armor, Plate Carriers, Pouches/Accessories and Apparel. 

Proof of purchase required, only applies to original purchaser, and product must be purchased from Hoplite Armor LLC to qualify. Police report or internal report (if worn in the line of duty) is required as proof of the incident. Picture of the label and serial number is required and must match the serial number associated with the order in our system. Only the damaged product(s) will be replaced. We will replace it with the same product, if unavailable we may replace it with a similar product or reserve the right to issue store credit equal to the original purchase price. 

Warranty only applies to legitimate instances of self defense. Does not cover intentional damage or damage resulting from gross negligence. For example, we will replace your armor if you get shot in a home defense incident. We will not replace it if you shoot it intentionally yourself for any reason, or have your friends shoot you while wearing it. We will not replace it if you are shot while committing a crime such as robbing a bank or convenience store. This warranty does not cover theft.

You may also like

Quick view
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
$1,500.00
Quick view
Hoplite ACH Helmet Level IIIA Fully Loaded
$750.00
Quick view
CM-8M Full-Face Respirator
$324.99
Sale
Quick view
UV-5RTP 8W/4W/1W Dual Band
$27.99 $23.99 Save $4.00

Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded

$1,500.00 Save $-1,500.00
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded

Hoplite ACH Level III Rifle Rated Helmet

 

Stop Rounds up to NATO M80 (7.62×51) round at 2100 ft/sec (640 m/s)

FULLY-LOADED HIGH-CUT NOMINAL WEIGHT
  • Medium 3.1 lbs. / 1.43 Kg;
  • Large 3.3 lbs. / 1.5 Kg;
  • X-Large 3.5 lbs. / 1.61 Kg 

Introducing the game changing AireLock Liner System.

The Pads-free AIRELOCK is a game changer in terms of user safety, comfort and ergonomics. With its all new quick-dial system, less than 50% of the liner touches the user’s head, creating a floating effect that delivers maximum comfort over extended periods of use.

The advanced silent dial system and premium chinstrap deliver a solution that is ideal for front line users. The AIRELOCK is the ultimate liner system for modern day operations. The AireLock Liner System is versatile and modular, and built to allow every user the ability to customize their own head protection configurations specific to their needs. 

FULL LEVEL III RIFLE RATED ACH

  • High Cut Shell
  • Velcro
  • Bungee
  • M-Lock Aire Rail System
  • Aire Mount NVG Shroud
  • Aire Support Prime Cushion System
  • Adjustable CAM Retention System

All Helmets Are Custom Made to Order

5 Week Estimated Lead Time 

RIFLE THREATS DEFEATED

Weapon Ammunition Velocity

 

5.56x45 M193 2,986 fps
7.62x39 M1943 2.676 fps
7.62x51 M80 Ball 2,100 fps


PISTOL THREATS DEFEATED

Weapon Ammunition 

STRIKING
VELOCITY

ft/s

STRIKING
VELOCITY

m/s
9mm 50-grain USM4 2490 759
9mm Fiocchi, 115-grain FMJ 1540 469
9mm 124-grain Hydra-Shok JHP 1230 375

9mm

 124-grain FMJ 1425 434
9mm 124-grain FMJ Steel 1262 385
.357 100-grain Frangible SF 1774 533
.357 115-grain JHP 1645 501
.357 125-grain SIG FMJ FN 1475 450
.357 125-grain GDHP 1454 443
.40-cal 95-grain S&W HP 1697 517
.40-cal 115-grain S&W JHP 1249 381
.40-cal 180-grain S&W JHP 1098 35
.44 Magnum 240-grain SJHP 1412 430

 

HOW TO FIT YOUR HELMET

Getting the right fit is important for performance and comfort. Use a tape measure and caliper to take measurements. The wearer MUST be seated in an upright position for proper fitting. See the illustrations for correct measuring points.

NOTE: If any measurement falls on the dividing line between sizes, select the larger size.

 

Small
UP TO 7¼" / 184 mm Length
UP TO 6½" / 162 mm Width
UP TO 21¼" / 538 mm Circumference
Medium
7¼" / 184 mm to 7¾" / 198 mm Length
UP TO 6½" / 162 mm Width
21¼" / 538 mm to 22½" / 573 mm Circumference
Large
7¾" / 198 mm to 8¼" / 210 mm Length
UP TO 6½" / 162 mm Width
22½" / 573 mm to 23½"/ 597 mm Circumference
Extra-Large
8¼" / 210 mm and over Length
6½" / 162 mm and over Width
23½"/ 597 mm and over Circumference

Restrictions

Restrictions on the Purchase, Ownership, or Possession of Body Armor are as follows:

It is a violation of United States Federal Law for a person convicted of a violent felony to purchase, own, or possess body armor. In addition, various states also have enacted legislation restricting the purchase, ownership, or possession of body armor by persons convicted of drug crimes, certain other felonies, or other violent crimes. By purchasing body armor from Hoplite Armor, LLC you acknowledge and certify that:

  1. You have not been convicted of a felony.
  2. The end user has not been convicted of any other crime that would restrict their ability to purchase, own, or possess body armor under any applicable Local, State, or Federal law ordinance or restriction.
  3. The end user will not use any body armor purchased from Hoplite Armor, LLC for any criminal purpose.
  4. The end user is over the age of 18.
  5. The end user will not transport or use any Hoplite Armor products outside of the United States.

Hoplite Armor, LLC reserves the right, in its sole discretion, to refuse the sale of body armor to any person or entity. Additionally, the online sale of body armor to residents of Connecticut and NY is strictly prohibited, unless the sale is made to certain law enforcement or military personnel, or through a face-to-face transaction.

Hoplite Armor does not ship any products outside of the United States in compliance with ITAR regulations. By purchasing, owning, or possessing Hoplite Armor systems, the end user certifies that no Hoplite Armor products will be transported or used outside of the United States.

All statements contained herein, or in any other related Hoplite publication of any kind, are not designed to provide legal counsel in any way, shape or form. It is strongly recommended that customers conduct a reasonable amount of Due Diligence prior to purchasing, owning or possessing body armor in order to avoid any legal ramifications.

***DUE TO THE LIFE-SAVING NATURE OF ARMOR PRODUCTS, ALL SALES ARE FINAL***

Hoplite Armor Lifetime Body Armor Warranty Terms and Conditions:

Hoplite Armor LLC stands behind the reliability and quality of the products we sell. In the unfortunate event that you are shot while wearing products purchased from us, we will replace damaged equipment at no cost to you at any time, as long as a valid police report is provided. This covers all of our body armor products, which includes Body Armor, Plate Carriers, Pouches/Accessories and Apparel. 

Proof of purchase required, only applies to original purchaser, and product must be purchased from Hoplite Armor LLC to qualify. Police report or internal report (if worn in the line of duty) is required as proof of the incident. Picture of the label and serial number is required and must match the serial number associated with the order in our system. Only the damaged product(s) will be replaced. We will replace it with the same product, if unavailable we may replace it with a similar product or reserve the right to issue store credit equal to the original purchase price. 

Warranty only applies to legitimate instances of self defense. Does not cover intentional damage or damage resulting from gross negligence. For example, we will replace your armor if you get shot in a home defense incident. We will not replace it if you shoot it intentionally yourself for any reason, or have your friends shoot you while wearing it. We will not replace it if you are shot while committing a crime such as robbing a bank or convenience store. This warranty does not cover theft.

Hoplite ACH Helmet Level IIIA Fully Loaded

$750.00 Save $-750.00
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded
Hoplite ACH Helmet Level IIIA Fully Loaded

Hoplite ACH Level IIIA Fully Loaded Helmet

 

FULLY-LOADED HIGH-CUT NOMINAL WEIGHT
  • Medium 3.2 lbs. / 1.45 Kg;
  • Large 3.3 lbs. / 1.48 Kg;
  • X-Large 3.5 lbs. / 1.58 Kg

 Made in the USA by Armor Source. The best performing, best made and most trusted helmets on the planet.

Shells

The AS-200 Ballistic Helmet is the most affordable ACH/ MICH Shape NIJ Level IIIA protection helmet on the market today Offering proven fragmentation protection capabilities matched by our dedication to trim unwanted weight, the AS-200 is adaptable for use with all ArmorSource accessories, rails and shrouds and is relied on today by military organizations worldwide. 

Support and Retention

The AS-200 Series Helmet comes with the AireLink retention system designed for boltless and bolted ballistic helmets. Durable and weight-conscious, this ACH style retention/chinstrap is the preferred solution for military organizations throughout the USA and around the globe. This 4 point system features 3/4” nylon webbing, a large nape pad and heavy duty chin strap clip offering a wide range of adjustments and reduced weight as compared to standard hardware based retentions.

Replaces the R2 and R4 Retention Systems

The new AireSupport Prime system introduces a unique approach to modern day suspension systems. When combined with ArmorSource’s certified shells, the AireSupport Prime aids our solutions in exceeding the U.S. Army’s Blunt Impact requirements, improves ballistic and environmental performances, and delivers optimal comfort for users with a 30% weight reduction vs equivalent premium systems.

Replaces P4 Suspension System.

All Helmets Are Custom Made to Order

5 Week Estimated Lead Time

LEVEL IIIA ACH Helmet

  • High Cut Shell
  • Velcro
  • Bungee
  • M-Lock Aire Rail System
  • Aire Mount NVG Shroud
  • Aire Link Retention System
  • Aire Support Cushion System
  • Adjustable CAM Retention System

PISTOL THREATS DEFEATED

Weapon Ammunition 

STRIKING
VELOCITY

ft/s

STRIKING
VELOCITY

m/s
9mm 50-grain USM4 2490 759
9mm Fiocchi, 115-grain FMJ 1540 469
9mm 124-grain Hydra-Shok JHP 1230 375

9mm

 124-grain FMJ 1425 434
9mm 124-grain FMJ Steel 1262 385
.357 100-grain Frangible SF 1774 533
.357 115-grain JHP 1645 501
.357 125-grain SIG FMJ FN 1475 450
.357 125-grain GDHP 1454 443
.40-cal 95-grain S&W HP 1697 517
.40-cal 115-grain S&W JHP 1249 381
.40-cal 180-grain S&W JHP 1098 35
.44 Magnum 240-grain SJHP 1412 430

 

HOW TO FIT YOUR HELMET

Getting the right fit is important for performance and comfort. Use a tape measure and caliper to take measurements. The wearer MUST be seated in an upright position for proper fitting. See the illustrations for correct measuring points.

NOTE: If any measurement falls on the dividing line between sizes, select the larger size.

Small
UP TO 7¼" / 184 mm Length
UP TO 6½" / 162 mm Width
UP TO 21¼" / 538 mm Circumference
Medium
7¼" / 184 mm to 7¾" / 198 mm Length
UP TO 6½" / 162 mm Width
21¼" / 538 mm to 22½" / 573 mm Circumference
Large
7¾" / 198 mm to 8¼" / 210 mm Length
UP TO 6½" / 162 mm Width
22½" / 573 mm to 23½"/ 597 mm Circumference
Extra-Large
8¼" / 210 mm and over Length
6½" / 162 mm and over Width
23½"/ 597 mm and over Circumference

Restrictions

Restrictions on the Purchase, Ownership, or Possession of Body Armor are as follows:

It is a violation of United States Federal Law for a person convicted of a violent felony to purchase, own, or possess body armor. In addition, various states also have enacted legislation restricting the purchase, ownership, or possession of body armor by persons convicted of drug crimes, certain other felonies, or other violent crimes. By purchasing body armor from Hoplite Armor, LLC you acknowledge and certify that:

  1. You have not been convicted of a felony.
  2. The end user has not been convicted of any other crime that would restrict their ability to purchase, own, or possess body armor under any applicable Local, State, or Federal law ordinance or restriction.
  3. The end user will not use any body armor purchased from Hoplite Armor, LLC for any criminal purpose.
  4. The end user is over the age of 18.
  5. The end user will not transport or use any Hoplite Armor products outside of the United States.

Hoplite Armor, LLC reserves the right, in its sole discretion, to refuse the sale of body armor to any person or entity. Additionally, the online sale of body armor to residents of Connecticut and NY is strictly prohibited, unless the sale is made to certain law enforcement or military personnel, or through a face-to-face transaction.

Hoplite Armor does not ship any products outside of the United States in compliance with ITAR regulations. By purchasing, owning, or possessing Hoplite Armor systems, the end user certifies that no Hoplite Armor products will be transported or used outside of the United States.

All statements contained herein, or in any other related Hoplite publication of any kind, are not designed to provide legal counsel in any way, shape or form. It is strongly recommended that customers conduct a reasonable amount of Due Diligence prior to purchasing, owning or possessing body armor in order to avoid any legal ramifications.

***DUE TO THE LIFE-SAVING NATURE OF ARMOR PRODUCTS, ALL SALES ARE FINAL***

Hoplite Armor Lifetime Body Armor Warranty Terms and Conditions:

Hoplite Armor LLC stands behind the reliability and quality of the products we sell. In the unfortunate event that you are shot while wearing products purchased from us, we will replace damaged equipment at no cost to you at any time, as long as a valid police report is provided. This covers all of our body armor products, which includes Body Armor, Plate Carriers, Pouches/Accessories and Apparel. 

Proof of purchase required, only applies to original purchaser, and product must be purchased from Hoplite Armor LLC to qualify. Police report or internal report (if worn in the line of duty) is required as proof of the incident. Picture of the label and serial number is required and must match the serial number associated with the order in our system. Only the damaged product(s) will be replaced. We will replace it with the same product, if unavailable we may replace it with a similar product or reserve the right to issue store credit equal to the original purchase price. 

Warranty only applies to legitimate instances of self defense. Does not cover intentional damage or damage resulting from gross negligence. For example, we will replace your armor if you get shot in a home defense incident. We will not replace it if you shoot it intentionally yourself for any reason, or have your friends shoot you while wearing it. We will not replace it if you are shot while committing a crime such as robbing a bank or convenience store. This warranty does not cover theft.

CM-8M Full-Face Respirator

$324.99 Save $-324.99
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator
CM-8M Full-Face Respirator

 

The CM-8M tactical full-face respirator is a next-gen CBRN mask, specially engineered to meet and exceed the strictest military requirements. Thanks to a unique new visor design, it provides unparalleled visibility combined with optics compatibility, along with a six-point mesh head harness for added stability. Like all MIRA Safety CBRN gas masks, it also provides trusted protection from a full spectrum of toxic industrial chemicals (TIC) and chemical warfare agents (CWA) including chemical, biological and nuclear threats such as radioactive dust, noxious gas, vaporized pollutants and more.

 

Key Features of the CM-8M Full-Face Respirator:

  • Contoured panoramic visor provides maximum field of view (92.5%) while preserving compatibility with night vision goggles, thermal optics and rifle scopes
  • 20-year shelf life
  • Uses widely available NATO-standard, 40-mm filter cartridges
  • Durable bromobutyl rubber construction (meets CBRN protection standards)
  • Tested for compatibility with a variety of high-cut helmets
  • Hypoallergenic inner mask prevents fogging, even under hard use 
  • Tested resistance to mustard gas penetration for nearly 30 hours
  • Fits up to 2 standard 40-mm 1/7” NATO filter cartridges (widely available with varying protection levels)
  • Can be used with a single filter on either side to ensure proper cheek weld for left- or right-handed shooters
  • Comes with a pre-installed hydration system and canteen
  • Compatible with CamelBak water bladders with a Type M adapter (not included)
  • Compatible with MIRA Safety gas mask microphone (sold separately)
  • Compatible with MIRA Safety gas mask replacement parts kit
  • Conforms to European quality and sustainability standards, marked with the CE symbol
  • Meets all requirements under EN 136:1998, Class III
  • Complies with all standards under EN 168 for impact protection, making this the perfect mask for riot control situations 
  • Carries MIRA Safety’s 1-year manufacturer warranty
  • Manufactured in the Czech Republic


Maximum Situational Awareness

The CM-8M features a radically re-engineered visor that combines an unmatched field of view (over 92%), with a contoured shape that’s 100% compatible with popular Night Vision, Rifle Scopes and Thermal Optic setups. That means preserving crucial peripheral vision while ensuring functionality in even the most hostile environments. That means not just an enhanced field of view, but enhanced overall awareness—allowing you to quickly and confidently assess and engage threats as needed.

CM-8M Full Face Respirator Sizing

For the initial launch, the CM-8M will come in one universal size. The fit will be similar to the medium CM-7M, and the CM-6M, which also come in one universal size. We do not recommend this mask for people with smaller-than-average head shapes, nor do we recommend it for above-average head shapes. Always conduct a negative pressure test to ensure you are getting a tight seal, and conduct this test each time when donning the mask. 

The CM-8M has been tested with a wide variety of high-cut helmets and shown to integrate seamlessly. However, if the wearer has a small head, the mask may not fit well with a helmet. 

Mission-Flexible

As opposed to some full-face respirators that are extremely specialized and mission-specific, the CM-8M was designed as a mission-flexible upgrade for civilians, law enforcement and military alike. Since it’s not a dedicated military mask, that means everyone can tap into the same level of protection that’s trusted by top Special Forces.

MIRA Safety Strategic Support

The CM-8M is part of the MIRA Safety family of masks; which means it uses the same filter cartridges, components and optional upgrades as your existing MIRA Safety masks. It’s compatible with the MIRA Safety Microphone System and Replacement Parts Kit, and it features the same basic construction as your existing MIRA Safety masks; allowing for rapid transition and upgrade to the CM-8M from existing platforms.

Technical Specifications

The CM-8M gas mask is made from thick bromobutyl rubber (CBRN-compliant) with a polycarbonate mask and a 6-point mesh head harness to ensure a rock-solid fit for users of all sizes.

The key improvement for the new CM-8M is its uniquely-contoured polycarbonate visor, combining unparalleled field-of-view with a flat front that works perfectly with all your optics and NVG systems. 

We’ve also refined our existing gas mask designs, maximizing ergonomics and minimizing the overall size of the mask. The full-face respirator’s inner mask is made from a special hypoallergenic compound that prevents fogging and reduces carbon dioxide(CO2) content in the mask’s inner space, improving comfort for long hours of potential usage.

The CM-8M features a central speech diaphragm that ensures at least 95% intelligibility of speech; however the gas mask microphone is strongly recommended as an upgrade for all MIRA Safety masks. MIRA Safety replacement parts are compatible with the CM-8M mask, and more new accessories will be available for the platform soon.

Like all MIRA Safety masks, the CM-8M is designed for use with “NATO standard” filter cartridges (Rd 40 x 1/7” thread in accordance with the EN 148-1 standard). 

Selection of a suitable filter depends on the type and concentration of anticipated toxic agent. The CM-8M tactical mask equipped with a TIC or CWA filter is only safe for use in an environment containing at least 19.5% oxygen. The principles of filter selection and application are described in the filter user guides.

The CM-8M tactical gas mask may be used in class 1 explosive environments only. The CM-8M mask meets all of the requirements for class 3 of the EN 136 standard. It’s a great choice for riot gear or as a riot control gas mask.


TECHNICAL DATA

WEIGHT: 540g

INTELLIGIBILITY OF TALK: 95%

AVAILABLE IN: 1 size

MATERIAL OF THE FACEPIECE: Bromine-butyl rubber

GENERAL FIELD OF VISION: min. 92.5%

MATERIAL OF THE VISOR: Polycarbonate

FILTER CONNECTION THREAD: Rd 40 mm x 1/7”

Breathing resistance at 30l/min. air flow:

INHALATION RESISTANCE: max. 30 Pa

EXHALATION RESISTANCE: max. 60 Pa


Storage

The CM-8M tactical gas mask must be stored in a dark, cool and dust-free place free from sudden temperature changes. The storage room should be ventilated regularly. Temperatures may vary between 10°C and 25°C within relative humidity up to 65%. NBC gas masks must not be exposed to radiant heat or sunshine. Fuels, solvents, lubricants and other inflammable substances, including chemicals, must not be stored with masks. Moreover, there must not be any electrical machines or appliances that produce sparks or discharges during operation (ozone creation).

Avoid deformation of the rubber parts of the facepiece and internal CBRN gas mask during storage.

Restrictions

Restrictions on the Purchase, Ownership, or Possession of Body Armor are as follows:

It is a violation of United States Federal Law for a person convicted of a violent felony to purchase, own, or possess body armor. In addition, various states also have enacted legislation restricting the purchase, ownership, or possession of body armor by persons convicted of drug crimes, certain other felonies, or other violent crimes. By purchasing body armor from Hoplite Armor, LLC you acknowledge and certify that:

  1. You have not been convicted of a felony.
  2. The end user has not been convicted of any other crime that would restrict their ability to purchase, own, or possess body armor under any applicable Local, State, or Federal law ordinance or restriction.
  3. The end user will not use any body armor purchased from Hoplite Armor, LLC for any criminal purpose.
  4. The end user is over the age of 18.
  5. The end user will not transport or use any Hoplite Armor products outside of the United States.

Hoplite Armor, LLC reserves the right, in its sole discretion, to refuse the sale of body armor to any person or entity. Additionally, the online sale of body armor to residents of Connecticut and NY is strictly prohibited, unless the sale is made to certain law enforcement or military personnel, or through a face-to-face transaction.

Hoplite Armor does not ship any products outside of the United States in compliance with ITAR regulations. By purchasing, owning, or possessing Hoplite Armor systems, the end user certifies that no Hoplite Armor products will be transported or used outside of the United States.

All statements contained herein, or in any other related Hoplite publication of any kind, are not designed to provide legal counsel in any way, shape or form. It is strongly recommended that customers conduct a reasonable amount of Due Diligence prior to purchasing, owning or possessing body armor in order to avoid any legal ramifications.

***DUE TO THE LIFE-SAVING NATURE OF ARMOR PRODUCTS, ALL SALES ARE FINAL***

Hoplite Armor Lifetime Body Armor Warranty Terms and Conditions:

Hoplite Armor LLC stands behind the reliability and quality of the products we sell. In the unfortunate event that you are shot while wearing products purchased from us, we will replace damaged equipment at no cost to you at any time, as long as a valid police report is provided. This covers all of our body armor products, which includes Body Armor, Plate Carriers, Pouches/Accessories and Apparel. 

Proof of purchase required, only applies to original purchaser, and product must be purchased from Hoplite Armor LLC to qualify. Police report or internal report (if worn in the line of duty) is required as proof of the incident. Picture of the label and serial number is required and must match the serial number associated with the order in our system. Only the damaged product(s) will be replaced. We will replace it with the same product, if unavailable we may replace it with a similar product or reserve the right to issue store credit equal to the original purchase price. 

Warranty only applies to legitimate instances of self defense. Does not cover intentional damage or damage resulting from gross negligence. For example, we will replace your armor if you get shot in a home defense incident. We will not replace it if you shoot it intentionally yourself for any reason, or have your friends shoot you while wearing it. We will not replace it if you are shot while committing a crime such as robbing a bank or convenience store. This warranty does not cover theft.

UV-5RTP 8W/4W/1W Dual Band

$27.99 $23.99 Save $4.00
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band
UV-5RTP 8W/4W/1W Dual Band

▸ FCC ID: 2AJGM-UV5R

▸ Upgraded version of UV-5R with Tri-Power 8W / 4W / 1W.

▸ Optimal Modulation of TX/RX Power transistor, True 8W Output Power, Longer Effective Talking Range.

▸ Upgrade the frame material. Metallic, more durable and more fashionable. With full high two colors LCD definition display, the screen exquisite clarity.

▸ 3 key BFB upgrade to BFB 301.

FUNCTIONS:

  • Frequency Range: VHF 144-148MHz & UHF 420-450MHz
  • Dual-Band Display, Dual Freq. Display, Dual-Standby
  • Output Power: 8/ 4 /1Watts Triple Power
  • 128 Channels 50 CTCSS and 104 DCS
  • Built-in VOX Function
  • 1750Hz Brust Tone
  • LED Flashlight
  • Large LCD Display
  • Hight / Med / Low RF Power Switchable
  • 25KHz/12.5KHz Switchable
  • Emergency Alert
  • Low Battery Alert
  • Battery Saver
  • Time-out Timer
  • Keypad Lock
  • Monitor Channel
  • Channel Step: 2.5/5/6.25/10/12.5/25KHz
Specifications:
Frequency Range: VHF 144-148MHz & UHF 420-450MHz
Channel No.: 128
Frequency Stability: ±2.5ppm
Operating Voltage: DC 7.4V
Mode of operation: Simple or semi-duplex
Output power: 8W / 4W / 1W (Max 8W)
Dimension（W x H x D）: 100 x 52 x 32 mm
Weight: 250g （including battery, antenna）
Antenna Type: Compatible with SMA-Female Antenna
Earpiece & Programming Type: Compatible with K-plug earpiece/cable

PACKAGE CONTENT:

  • 1 x Baofeng UV-5RTP Two Way Radio
  • 1 x 7.4V 1800mAh Li-ion Battery
  • 1 x Antenna
  • 1 x Earphone Mic/Headset
  • 1 x Belt Clip
  • 1 x Hand Strap
  • 1 x Manual
  • 1 x Adapter
  • 1 x Desktop Charger

Restrictions

Restrictions on the Purchase, Ownership, or Possession of Body Armor are as follows:

It is a violation of United States Federal Law for a person convicted of a violent felony to purchase, own, or possess body armor. In addition, various states also have enacted legislation restricting the purchase, ownership, or possession of body armor by persons convicted of drug crimes, certain other felonies, or other violent crimes. By purchasing body armor from Hoplite Armor, LLC you acknowledge and certify that:

  1. You have not been convicted of a felony.
  2. The end user has not been convicted of any other crime that would restrict their ability to purchase, own, or possess body armor under any applicable Local, State, or Federal law ordinance or restriction.
  3. The end user will not use any body armor purchased from Hoplite Armor, LLC for any criminal purpose.
  4. The end user is over the age of 18.
  5. The end user will not transport or use any Hoplite Armor products outside of the United States.

Hoplite Armor, LLC reserves the right, in its sole discretion, to refuse the sale of body armor to any person or entity. Additionally, the online sale of body armor to residents of Connecticut and NY is strictly prohibited, unless the sale is made to certain law enforcement or military personnel, or through a face-to-face transaction.

Hoplite Armor does not ship any products outside of the United States in compliance with ITAR regulations. By purchasing, owning, or possessing Hoplite Armor systems, the end user certifies that no Hoplite Armor products will be transported or used outside of the United States.

All statements contained herein, or in any other related Hoplite publication of any kind, are not designed to provide legal counsel in any way, shape or form. It is strongly recommended that customers conduct a reasonable amount of Due Diligence prior to purchasing, owning or possessing body armor in order to avoid any legal ramifications.

***DUE TO THE LIFE-SAVING NATURE OF ARMOR PRODUCTS, ALL SALES ARE FINAL***

Hoplite Armor Lifetime Body Armor Warranty Terms and Conditions:

Hoplite Armor LLC stands behind the reliability and quality of the products we sell. In the unfortunate event that you are shot while wearing products purchased from us, we will replace damaged equipment at no cost to you at any time, as long as a valid police report is provided. This covers all of our body armor products, which includes Body Armor, Plate Carriers, Pouches/Accessories and Apparel. 

Proof of purchase required, only applies to original purchaser, and product must be purchased from Hoplite Armor LLC to qualify. Police report or internal report (if worn in the line of duty) is required as proof of the incident. Picture of the label and serial number is required and must match the serial number associated with the order in our system. Only the damaged product(s) will be replaced. We will replace it with the same product, if unavailable we may replace it with a similar product or reserve the right to issue store credit equal to the original purchase price. 

Warranty only applies to legitimate instances of self defense. Does not cover intentional damage or damage resulting from gross negligence. For example, we will replace your armor if you get shot in a home defense incident. We will not replace it if you shoot it intentionally yourself for any reason, or have your friends shoot you while wearing it. We will not replace it if you are shot while committing a crime such as robbing a bank or convenience store. This warranty does not cover theft.

Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier

$2,650.00 $2,120.00 Save $530.00
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier
Level IV Body Armor, Carrier & Helmet Combo- 26605 SAPI / Mark II Carrier

26605 SAPI Plates / Mark II Carrier / ACH Helmet

The Mark II Carrier Combo is the perfect civilian body armor solution. The plate carrier platform is highly capable, rugged and minimalistic. The 26605 Series NIJ 06 Certified Level IV is the best performing body armor plate in its class and is made in the USA by LTC, Leading Technology Composites.

This configuration represents the perfect combination of weight, coverage, mobility and functionality.

  • 100% Made in the USA 
  • Top Quality Materials and Construction  
  • 5 Year Manufacturers Warranty 
  • Multi-hit Edge to Edge Protection  
  • Perfect ergonomics 
  • Guaranteed Performance  
  • Extremely Durable, High Quality Carrier
  • Economical Solution 
  • Includes (Qty: 2) 26605-19 SAPI plates Size Large and Mark II Carrier

The materials used in the fabrication of the 26605 series allows for projectiles to be absorbed within the body armor plate itself, preventing dangerous spall as is common with steel plates. Don't rely on your carrier to stop high speed bullet fragmentation.

The 26605 is a Triple-curve hard armor, Multi-Hit, Stand Alone, SAPI plate certified under the NIJ 0101.06 Level IV Standard. The multiple geometric contours of the plate design result in one of the most comfortable plates ever created.  Manufactured from high-density alumina ceramic core (Al2O3) backed with layered polymer composite fiber. Finished in a Durable Cordura wrap to protect against UV Rays, dirt, dust and water.

All our hard armor plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Includes Qty 2, 26605-19 NIJ 06 Certified Medium SAPI Plates and Plate Carrier. Accessories sold separately.

Some popular sizes/items may require a 6-10 week lead time. 

Sizing is best suited to wearers in the 5'10" - 6'4" / 200-250 lb range.

Personal preference is key in plate sizing. If you are on the smaller end of the spectrum listed above choose size medium for a lighter system with less coverage. If you are larger than 6'4" and 250 lbs select size XL.

Specs:

  • Weight Per Plate: 8.5 lbs 
  • Dimension: 10"H x 13"L
  • Thickness: .73”
  • Level: IV

* Weights and measurements are nominal 

Rounds Defeated: 

Weapon Ammunition  STRIKING
VELOCITY ft/s 		STRIKING
VELOCITY m/s
Rifle M-1 30.06 AP M2 2880 878
Rifle FN FAL 7.62x51mm - Ball/AP 2780 847
Rifle M-16/AR-15 5.56x45mm-M193/M855/ss109 3025 922

Rifle SVD,Dragunov

M.G.-PKM

 7.62x54R-L/LPS/B-32 API  2850 869
Rifle AK-47,M,SKS 7.62x39mm-API 2410 735
Rifle AK-47,M,SKS 7.62x39mm-Ball/Steel Core 2410 735

 

WHICH PLATE SIZE IS RIGHT FOR ME?

Personal preference is the single most important determining factor when choosing the right size armor for any individual. The wearer must feel comfortable in whatever system and size they choose in order to maximize the effectiveness of any armor system. That having been said, the prior standard for all plates was 10”x12”. Military specifications now include a full range of sizes from Small to Extra Large, however size Medium, 9.5”x12.5” is considered the ideal fit for the 95th percentile, meaning that Medium is designed to fit 95% of all military personnel. 

In order to provide a more easily discernible size chart we focus on the height of an individual as the most important factor in determining proper fitment. See the outline below for a general height / plate size reference. Keep in mind, personal build, and personal preference are the most important factors.

If you purchase a set of plates that you feel is the wrong fit, call us for guidance and to get a quick and easy exchange.

SAPI Sizing Specifications

Size Dimensions Weight Height
Small 8.5”x11.5” 6.5 lbs <5’5”-5’8”
Medium 9.5”x12.50” 7.5 lbs 5‘8” - 6’
Large 10.25”x13.25” 8.5 lbs 6’1” - 6’4”
XL 11”x14” 9.75 lbs >6’4”


Swimmer Sizing Specifications

Size Dimensions Weight Height
Small 8”x10” 4.8 lbs <5’5”-5’8”
Medium 10”x12” 6.5 lbs

>5’8”

Hoplite ACH Level III Rifle Rated Helmet

 

Stop Rounds up to NATO M80 (7.62×51) round at 2100 ft/sec (640 m/s)

FULLY-LOADED HIGH-CUT NOMINAL WEIGHT
  • Medium 3.1 lbs. / 1.43 Kg;
  • Large 3.3 lbs. / 1.5 Kg;
  • X-Large 3.5 lbs. / 1.61 Kg 

Introducing the game changing AireLock Liner System.

The Pads-free AIRELOCK is a game changer in terms of user safety, comfort and ergonomics. With its all new quick-dial system, less than 50% of the liner touches the user’s head, creating a floating effect that delivers maximum comfort over extended periods of use.

The advanced silent dial system and premium chinstrap deliver a solution that is ideal for front line users. The AIRELOCK is the ultimate liner system for modern day operations. The AireLock Liner System is versatile and modular, and built to allow every user the ability to customize their own head protection configurations specific to their needs. 

FULL LEVEL III RIFLE RATED ACH

  • High Cut Shell
  • Velcro
  • Bungee
  • M-Lock Aire Rail System
  • Aire Mount NVG Shroud
  • Aire Support Prime Cushion System
  • Adjustable CAM Retention System

All Helmets Are Custom Made to Order

5 Week Estimated Lead Time 

RIFLE THREATS DEFEATED

Weapon Ammunition Velocity

 

5.56x45 M193 2,986 fps
7.62x39 M1943 2.676 fps
7.62x51 M80 Ball 2,100 fps


PISTOL THREATS DEFEATED

Weapon Ammunition 

STRIKING
VELOCITY

ft/s

STRIKING
VELOCITY

m/s
9mm 50-grain USM4 2490 759
9mm Fiocchi, 115-grain FMJ 1540 469
9mm 124-grain Hydra-Shok JHP 1230 375

9mm

 124-grain FMJ 1425 434
9mm 124-grain FMJ Steel 1262 385
.357 100-grain Frangible SF 1774 533
.357 115-grain JHP 1645 501
.357 125-grain SIG FMJ FN 1475 450
.357 125-grain GDHP 1454 443
.40-cal 95-grain S&W HP 1697 517
.40-cal 115-grain S&W JHP 1249 381
.40-cal 180-grain S&W JHP 1098 35
.44 Magnum 240-grain SJHP 1412 430

 

HOW TO FIT YOUR HELMET

Getting the right fit is important for performance and comfort. Use a tape measure and caliper to take measurements. The wearer MUST be seated in an upright position for proper fitting. See the illustrations for correct measuring points.

NOTE: If any measurement falls on the dividing line between sizes, select the larger size.

 

Small
UP TO 7¼" / 184 mm Length
UP TO 6½" / 162 mm Width
UP TO 21¼" / 538 mm Circumference
Medium
7¼" / 184 mm to 7¾" / 198 mm Length
UP TO 6½" / 162 mm Width
21¼" / 538 mm to 22½" / 573 mm Circumference
Large
7¾" / 198 mm to 8¼" / 210 mm Length
UP TO 6½" / 162 mm Width
22½" / 573 mm to 23½"/ 597 mm Circumference
Extra-Large
8¼" / 210 mm and over Length
6½" / 162 mm and over Width
23½"/ 597 mm and over Circumference

 Questions? Call 855-ARMOR-01 

Restrictions

Restrictions on the Purchase, Ownership, or Possession of Body Armor are as follows:

It is a violation of United States Federal Law for a person convicted of a violent felony to purchase, own, or possess body armor. In addition, various states also have enacted legislation restricting the purchase, ownership, or possession of body armor by persons convicted of drug crimes, certain other felonies, or other violent crimes. By purchasing body armor from Hoplite Armor, LLC you acknowledge and certify that:

  1. You have not been convicted of a felony.
  2. The end user has not been convicted of any other crime that would restrict their ability to purchase, own, or possess body armor under any applicable Local, State, or Federal law ordinance or restriction.
  3. The end user will not use any body armor purchased from Hoplite Armor, LLC for any criminal purpose.
  4. The end user is over the age of 18.
  5. The end user will not transport or use any Hoplite Armor products outside of the United States.

Hoplite Armor, LLC reserves the right, in its sole discretion, to refuse the sale of body armor to any person or entity. Additionally, the online sale of body armor to residents of Connecticut and NY is strictly prohibited, unless the sale is made to certain law enforcement or military personnel, or through a face-to-face transaction.

Hoplite Armor does not ship any products outside of the United States in compliance with ITAR regulations. By purchasing, owning, or possessing Hoplite Armor systems, the end user certifies that no Hoplite Armor products will be transported or used outside of the United States.

All statements contained herein, or in any other related Hoplite publication of any kind, are not designed to provide legal counsel in any way, shape or form. It is strongly recommended that customers conduct a reasonable amount of Due Diligence prior to purchasing, owning or possessing body armor in order to avoid any legal ramifications.

***DUE TO THE LIFE-SAVING NATURE OF ARMOR PRODUCTS, ALL SALES ARE FINAL***

Hoplite Armor Lifetime Body Armor Warranty Terms and Conditions:

Hoplite Armor LLC stands behind the reliability and quality of the products we sell. In the unfortunate event that you are shot while wearing products purchased from us, we will replace damaged equipment at no cost to you at any time, as long as a valid police report is provided. This covers all of our body armor products, which includes Body Armor, Plate Carriers, Pouches/Accessories and Apparel. 

Proof of purchase required, only applies to original purchaser, and product must be purchased from Hoplite Armor LLC to qualify. Police report or internal report (if worn in the line of duty) is required as proof of the incident. Picture of the label and serial number is required and must match the serial number associated with the order in our system. Only the damaged product(s) will be replaced. We will replace it with the same product, if unavailable we may replace it with a similar product or reserve the right to issue store credit equal to the original purchase price. 

Warranty only applies to legitimate instances of self defense. Does not cover intentional damage or damage resulting from gross negligence. For example, we will replace your armor if you get shot in a home defense incident. We will not replace it if you shoot it intentionally yourself for any reason, or have your friends shoot you while wearing it. We will not replace it if you are shot while committing a crime such as robbing a bank or convenience store. This warranty does not cover theft.

Back to TACTICAL GEAR