Body Armor Swimmer / SAPI Plate Combo- Level III+ (23620)

NIJ 06 Certified Level IV Swimmer / SAPI Plate Combo (26605)

Includes one SAPI and one Swimmer plate 

~SOLD IN PAIRS~

Absolutely our Top Recommendation. This is the perfect combination of coverage and mobility. While the difference between Swimmer and SAPI plates is only a few square inches of coverage area, the cut allows for a far better range of motion.

The 26605 is a Triple-curve hard armor, Multi-Hit, Stand Alone plate certified under the NIJ 0101.06 Level IV Standard. Manufactured from high-density, reinforced alumina ceramic core (Al2O3) backed with lightweight layered polymer composite fiber and finished in a black Cordura Nylon Covering. A foam pad is affixed to the Strike-Face in order to protect against severe drops. NIJ standards require 2 drops. These plates must pass the internal 10 drop test and are inspected via X-Ray prior to environmental and ballistic testing.

The 26605 is a newer, upgraded version of the 26148 and 26135 series with a lighter backer plate, enhanced ceramics and a foam pad on the face to help protect against severe drops

The materials used in the fabrication of these plates allows for projectiles to be absorbed within the plate itself, preventing dangerous spall as is common with steel plates. Don't rely on your carrier to stop high speed bullet fragmentation

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Fits all standard Medium sized carriers.

Some popular items/sizes may incur a 4-8 week lead time. 

 Sizes:

• Small 8.75"x11.75” SAPI (6.5 lbs.) / 8"x10" Swimmer (4.8 lbs.)

• Medium 9.25"x 12.25" SAPI (7.5 lbs.)/ 10"x12" Swimmer (7 lbs.)

• Large 10"x13” SAPI (8.5 lbs.) / 10"x12" Swimmer (7 lbs.)

• XL 11"x 14" SAPI (9.75 lbs.)/ 10"x12" Swimmer (7 lbs.)

SPECS

• Thickness: 1"

• Level: IV

Weights and measurements are nominal 

Rounds Defeated:  

WHICH PLATE SIZE IS RIGHT FOR ME?

Personal preference is the single most important determining factor when choosing the right size armor for any individual. The wearer must feel comfortable in whatever system and size they choose in order to maximize the effectiveness of any armor system. That having been said, the prior standard for all plates was 10”x12”. Military specifications now include a full range of sizes from Small to Extra Large, however size Medium, 9.5”x12.5” is considered the ideal fit for the 95th percentile, meaning that Medium is designed to fit 95% of all military personnel. 

In order to provide a more easily discernible size chart we focus on the height of an individual as the most important factor in determining proper fitment. See the outline below for a general height / plate size reference. Keep in mind, personal build, and personal preference are the most important factors.

If you purchase a set of plates that you feel is the wrong fit, call us for guidance and to get a quick and easy exchange.

SAPI Sizing Specifications

Swimmer Sizing Specifications

26605 Swimmer Plates / Mark II Carrier Combo

The Mark II Carrier Combo is the perfect civilian armor solution. The carrier platform is highly capable, rugged and minimalistic. The 26605 NIJ 06 Certified Level IV is the best performing plate in its class and is made in the USA by LTC, Leading Technology Composites.

This configuration represents the perfect combination of weight, coverage, mobility and functionality.

• 100% Made in the USA 
• Top Quality Materials and Construction  
• 5 Year Manufacturers Warranty 
• Multi-hit Edge to Edge Protection  
• Perfect ergonomics 
• Guaranteed Performance  
• Extremely Durable, High Quality Carrier
• Economical Solution 
• Includes (Qty: 2) 26605 Swimmer plates and Mark II Carrier
• Fits 95% of the Population

The materials used in the fabrication of the 26605 series allows for projectiles to be absorbed within the plate itself, preventing dangerous spall as is common with steel plates. Don't rely on your carrier to stop high speed bullet fragmentation.

The 26605 is a Triple-curve hard armor, Multi-Hit, Stand Alone, SAPI plate certified under the NIJ 0101.06 Level IV Standard. The multiple geometric contours of the plate design result in one of the most comfortable plates ever created.  Manufactured from high-density alumina ceramic core (Al2O3) backed with layered polymer composite fiber. Finished in a Durable Cordura wrap to protect against UV Rays, dirt, dust and water.

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Includes Qty 2, 26605-2 NIJ 06 Certified Medium SAPI Plates and Plate Carrier. Accessories sold separately.

Some popular sizes/items may require a 4-10 week lead time. 

Fits 95% of the population based on US Military size specifications. Ideal for heights between 5'2" and 6'.

For smaller sizes pair the Mark II or Rogue 3.0 Carriers with 26605-17 Small SAPI. Click the magnifying glass icon at the top of this page and Search 26605 SAPI and Mark II or Rogue 3.0.

For Larger sizes, over 6'1" pair the Mark II Carrier with 26605-19 Large SAPI or 26605-20 XL SAPI. Click the magnifying glass icon at the top of this page and Search 26605 SAPI and Mark II or Rogue 3.0.

Specs:

• Weight Per Plate: 7 lbs 
• Dimensions: 10"H x 12"L
• Thickness: .73”
• Level: IV

* Weights and measurements are nominal  

Rounds Defeated: 

WHICH PLATE SIZE IS RIGHT FOR ME?

Personal preference is the single most important determining factor when choosing the right size armor for any individual. The wearer must feel comfortable in whatever system and size they choose in order to maximize the effectiveness of any armor system. That having been said, the prior standard for all plates was 10”x12”. Military specifications now include a full range of sizes from Small to Extra Large, however size Medium, 9.5”x12.5” is considered the ideal fit for the 95th percentile, meaning that Medium is designed to fit 95% of all military personnel. 

In order to provide a more easily discernible size chart we focus on the height of an individual as the most important factor in determining proper fitment. See the outline below for a general height / plate size reference. Keep in mind, personal build, and personal preference are the most important factors.

If you purchase a set of plates that you feel is the wrong fit, call us for guidance and to get a quick and easy exchange.

SAPI Sizing Specifications

Swimmer Sizing Specifications

 Questions? Call 855-ARMOR-01 

26605 SAPI Plates / Mark II Carrier Combo

The Mark II Carrier Combo is the perfect civilian body armor solution. The plate carrier platform is highly capable, rugged and minimalistic. The 26605 Series NIJ 06 Certified Level IV is the best performing body armor plate in its class and is made in the USA by LTC, Leading Technology Composites.

This configuration represents the perfect combination of weight, coverage, mobility and functionality.

• 100% Made in the USA 
• Top Quality Materials and Construction  
• 5 Year Manufacturers Warranty 
• Multi-hit Edge to Edge Protection  
• Perfect ergonomics 
• Guaranteed Performance  
• Extremely Durable, High Quality Carrier
• Economical Solution 
• Includes (Qty: 2) 26605 SAPI plates and Mark II Carrier

The materials used in the fabrication of the 26605 series allows for projectiles to be absorbed within the body armor plate itself, preventing dangerous spall as is common with steel plates. Don't rely on your carrier to stop high speed bullet fragmentation.

The 26605 is a Triple-curve hard armor, Multi-Hit, Stand Alone, SAPI plate certified under the NIJ 0101.06 Level IV Standard. The multiple geometric contours of the plate design result in one of the most comfortable plates ever created.  Manufactured from high-density alumina ceramic core (Al2O3) backed with layered polymer composite fiber. Finished in a Durable Cordura wrap to protect against UV Rays, dirt, dust and water.

All our hard armor plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Includes Qty 2, 26605-19 NIJ 06 Certified Medium SAPI Plates and Plate Carrier. Accessories sold separately.

Some popular sizes/items may require a 6-10 week lead time. 

Sizing is best suited to wearers in the 5'10" - 6'4" / 200-250 lb range.

Personal preference is key in plate sizing. If you are on the smaller end of the spectrum listed above choose size medium for a lighter system with less coverage. If you are larger than 6'4" and 250 lbs select size XL.

Specs:

• Weight Per Plate: 8.5 lbs 
• Dimension: 10"H x 13"L
• Thickness: .73”
• Level: IV

* Weights and measurements are nominal 

Rounds Defeated: 

WHICH PLATE SIZE IS RIGHT FOR ME?

Personal preference is the single most important determining factor when choosing the right size armor for any individual. The wearer must feel comfortable in whatever system and size they choose in order to maximize the effectiveness of any armor system. That having been said, the prior standard for all plates was 10”x12”. Military specifications now include a full range of sizes from Small to Extra Large, however size Medium, 9.5”x12.5” is considered the ideal fit for the 95th percentile, meaning that Medium is designed to fit 95% of all military personnel. 

In order to provide a more easily discernible size chart we focus on the height of an individual as the most important factor in determining proper fitment. See the outline below for a general height / plate size reference. Keep in mind, personal build, and personal preference are the most important factors.

If you purchase a set of plates that you feel is the wrong fit, call us for guidance and to get a quick and easy exchange.

SAPI Sizing Specifications

Swimmer Sizing Specifications

Questions? Call 855-ARMOR-01 

Lightweight 26125 Swimmer Plates / Mark II Carrier Combo

The Mark II Plate Carrier Combo is the perfect civilian body armor solution at an affordable price. The carrier platform is highly capable, rugged and minimalistic. The 26125 Series NIJ Certified Level IV is a proven body armor plate in its class and is made in the USA by LTC, Leading Technology Composites.

This configuration represents the perfect combination of weight, coverage, mobility functionality, and affordability.

• 100% Made in the USA 
• Top Quality Materials and Construction  
• 5 Year Manufacturers Warranty 
• Multi-hit Edge to Edge Protection  
• Perfect ergonomics 
• Guaranteed Performance  
• Extremely Durable, High Quality Carrier
• Economical Solution 
• Includes (Qty: 2) 26125 Swimmer plates 

These are without question the best deal available for top quality body armor plates. The materials used in the fabrication of these plates allows for projectiles to be absorbed within the plate itself, preventing dangerous spall as is common with steel plates. Don't rely on your carrier to stop high speed bullet fragmentation.

Our 10×12 inch single-curve hard armor swimmer cut plate is certified NIJ 0101.04 Level IV Stand Alone. Manufactured from high-density alumina ceramic core (Al2O3) backed with layered polymer composite fiber.

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Fits all standard carriers. 10x12 medium or large carrier.

Some popular items/sizes may incur a 4-8 week lead time. 

Specs:

• Weight:  7.0 lbs
• Thickness: .70"
• Level: IV

 Rounds Defeated: 

 Sizes:

10" x 12" Plates & Small/Medium or Large/XL Carrier

Finished in Cordura Nylon Covering. 

WHICH PLATE SIZE IS RIGHT FOR ME?

Personal preference is the single most important determining factor when choosing the right size armor for any individual. The wearer must feel comfortable in whatever system and size they choose in order to maximize the effectiveness of any armor system. That having been said, the prior standard for all plates was 10”x12”. Military specifications now include a full range of sizes from Small to Extra Large, however size Medium, 9.5”x12.5” is considered the ideal fit for the 95th percentile, meaning that Medium is designed to fit 95% of all military personnel. 

In order to provide a more easily discernible size chart we focus on the height of an individual as the most important factor in determining proper fitment. See the outline below for a general height / plate size reference. Keep in mind, personal build, and personal preference are the most important factors.

If you purchase a set of plates that you feel is the wrong fit, call us for guidance and to get a quick and easy exchange.

SAPI Sizing Specifications

Swimmer Sizing Specifications

Questions? Call 855-ARMOR-01

26225/6 Swimmer Plates / Mark II Carrier Combo

The Mark II Plate Carrier Combo is the perfect civilian body armor solution at an affordable price. The carrier platform is highly capable, rugged and minimalistic. The 26225 Series NIJ Certified Level IV is a proven body armor plate in its class and is made in the USA by LTC, Leading Technology Composites.

This configuration represents the perfect combination of weight, coverage, mobility functionality, and affordability.

• 100% Made in the USA 
• Top Quality Materials and Construction  
• 5 Year Manufacturers Warranty 
• Multi-hit Edge to Edge Protection  
• Perfect ergonomics 
• Guaranteed Performance  
• Extremely Durable, High Quality Carrier
• Economical Solution 
• Includes (Qty: 2) 26225/6 Swimmer plates 

These are without question the best deal available for top quality body armor plates. The materials used in the fabrication of these plates allows for projectiles to be absorbed within the plate itself, preventing dangerous spall as is common with steel plates. Don't rely on your carrier to stop high speed bullet fragmentation.

Our 8x10 and 10×12 inch single-curve hard armor swimmer cut plate is certified NIJ 0101.05 Level IV Stand Alone. Manufactured from high-density alumina ceramic core (Al2O3) backed with layered polymer composite fiber.

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Fits all standard carriers. 8x10 small carrier. 10x12 medium carrier.

Some popular items/sizes may incur a 4-8 week lead time. 

Specs:

• Weight:  5.9 Lbs, 8.25 lbs
• Thickness: .73"
• Level: IV

 Rounds Defeated: 

 Sizes:

10" x 12" or 8" x 10" Plates & Small/Medium or Large/XL Carrier

Finished in Cordura Nylon Covering. 

WHICH PLATE SIZE IS RIGHT FOR ME?

Personal preference is the single most important determining factor when choosing the right size armor for any individual. The wearer must feel comfortable in whatever system and size they choose in order to maximize the effectiveness of any armor system. That having been said, the prior standard for all plates was 10”x12”. Military specifications now include a full range of sizes from Small to Extra Large, however size Medium, 9.5”x12.5” is considered the ideal fit for the 95th percentile, meaning that Medium is designed to fit 95% of all military personnel. 

In order to provide a more easily discernible size chart we focus on the height of an individual as the most important factor in determining proper fitment. See the outline below for a general height / plate size reference. Keep in mind, personal build, and personal preference are the most important factors.

If you purchase a set of plates that you feel is the wrong fit, call us for guidance and to get a quick and easy exchange.

SAPI Sizing Specifications

Swimmer Sizing Specifications

Questions? Call 855-ARMOR-01