Two Level III++ SAPI Plates (19513) - Hoplite Armor Store

Body Armor SAPI/Swimmer Plates- Level III++ (19513)

$995.00 Save $-995.00
0 in stock

Level III++ SAPI or Swimmer Plates (19513)

~SOLD IN PAIRS~

VERY LIMITED QUANTITIES REMAINING

 

Our 19513 series 9.5x12.5 inch triple-curve hard armor SAPI cut plate is a Level III++ Stand Alone armor plate manufactured from high-density alumina ceramic core (Al2O3) backed with layered polymer composite fiber. Rounds are absorbed by this plate on impact, rather than deflected or fragmented.

The Hoplite Armor 19513 Series Level III++ plates are designed to provide a more affordable option for Level III rifle rated armor with Special Threat Protection against M855, M855A1 and 7.62×39 Mild Steel Core.

The 19513 Series plates have been validated according to NIJ 0101.06 ballistic standards at Chesapeake Testing, the worlds most trusted NIJ Certified laboratory, but have not been put through the complete NIJ Certification test due to the limited number available. They are however guaranteed to perform against all stated threats with minimal backface deformation, greatly outperforming every plate in its class.

Each plate weighs only 5.25 lbs and outperforms every Level III / III+ / III++ plate option from every major manufacturer in the United States at a significantly lower cost.

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Fits all standard Medium sized carriers.

Some popular items/sizes may incur a 4-10 week lead time. This is a custom solution that requires specific materials. It is however well worth the wait.

SPECS

Weight: 5.25 lbs
Thickness: 1.1"
Size: 9.5”x12.5”
Level: III++M855
Rounds Defeated:  7.62x39 MSC,  M855, M855A1, .308 (Plus all lesser threats)

WHICH PLATE SIZE IS RIGHT FOR ME?

Personal preference is the single most important determining factor when choosing the right size armor for any individual. The wearer must feel comfortable in whatever system and size they choose in order to maximize the effectiveness of any armor system. That having been said, the prior standard for all plates was 10”x12”. Military specifications now include a full range of sizes from Small to Extra Large, however size Medium, 9.5”x12.5” is considered the ideal fit for the 95th percentile, meaning that Medium is designed to fit 95% of all military personnel. 

In order to provide a more easily discernible size chart we focus on the height of an individual as the most important factor in determining proper fitment. See the outline below for a general height / plate size reference. Keep in mind, personal build, and personal preference are the most important factors.

If you purchase a set of plates that you feel is the wrong fit, call us for guidance and to get a quick and easy exchange.

SAPI Sizing Specifications

Size Dimensions Weight Height
Small 8.5”x11.5” 6.5 lbs <5’5”-5’8”
Medium 9.5”x12.50” 7.5 lbs 5‘8” - 6’
Large 10.25”x13.25” 8.5 lbs 6’1” - 6’4”
XL 11”x14” 9.75 lbs >6’4”


Swimmer Sizing Specifications

Size Dimensions Weight Height
Small 8”x10” 4.8 lbs <5’5”-5’8”
Medium 10”x12” 6.5 lbs

>5’8”

Weights and measurements are nominal 

You may also like

Quick view
Body Armor SAPI Plates- Level IV (26605)
from $749.00
Quick view
Body Armor Swimmer Plates- Level IV (26225-26226)
$399.99
Quick view
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
$1,500.00
Sale
Quick view
Hoplite Body Armor Mark II Carrier
$459.00 $395.00 Save $64.00

Body Armor SAPI Plates- Level IV (26605)

$749.00 Save $-749.00
Two SAPI Plates: NIJ Certified Level IV, Triple Curve, Stand Alone (26605) - Hoplite Armor Store
Two SAPI Plates: NIJ Certified Level IV, Triple Curve, Stand Alone (26605) - Hoplite Armor Store
Two SAPI Plates: NIJ Certified Level IV, Triple Curve, Stand Alone (26605) - Hoplite Armor Store
Two SAPI Plates: NIJ Certified Level IV, Triple Curve, Stand Alone (26605) - Hoplite Armor Store
Two SAPI Plates: NIJ Certified Level IV, Triple Curve, Stand Alone (26605) - Hoplite Armor Store
Two SAPI Plates: NIJ Certified Level IV, Triple Curve, Stand Alone (26605) - Hoplite Armor Store
Two SAPI Plates: NIJ Certified Level IV, Triple Curve, Stand Alone (26605) - Hoplite Armor Store
Two SAPI Plates: NIJ Certified Level IV, Triple Curve, Stand Alone (26605) - Hoplite Armor Store

NIJ 06 Certified Level IV SAPI Plates (26605)

~SOLD IN PAIRS~

 

The 26605 is a Triple-curve hard armor, Multi-Hit, Stand Alone, SAPI plate certified under the NIJ 0101.06 Level IV Standard. Manufactured from high-density, reinforced alumina ceramic core (Al2O3) backed with lightweight layered polymer composite fiber and finished in a black Cordura Nylon Covering. A foam pad is affixed to the Strike Face in order to protect against severe and repeated drops. NIJ standards require 2 drops. These plates must pass the internal 10 drop test and are inspected via X-Ray prior to environmental and ballistic testing.

The 26605 is a newer, upgraded version of the 26148 and 26135 series with a lighter backer plate, enhanced ceramics and a foam pad on the face to help protect against severe drops

The materials used in the fabrication of these plates allows for projectiles to be absorbed within the plate itself, preventing dangerous spall as is common with steel plates. Don't rely on your carrier to stop high speed bullet fragmentation

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

These plates fit perfectly in a Crye JPC 1.0 or 2.0 SAPI cut. Match plate size to carrier size. 

Fits all standard carriers of the same size. Match plates to carrier size.

Some popular items/sizes may incur a 4-8 week lead time.  

Sizes:

Small- 8.5”x11.5” 6.5 lbs

Medium- 9.5”x12.50” 7.5 lbs

Large- 10.25”x13.25” 8.5 lbs

XL- 11”x14” 9.75 lbs

 

SPECS

  • Thickness: 1"
  • Level: IV

 

Rounds Defeated:  

Weapon Ammunition 

STRIKING
VELOCITY

ft/s

STRIKING
VELOCITY

m/s 
Rifle M-1 30.06 AP M2 2880 878
Rifle FN FAL 7.62x51mm - M80 Ball 2780 847
Rifle FN FAL 7.62x51mm - M61 AP 2780 847
Rifle M-16/AR-15 5.56x45mm-M193/M855/M855A1 3180 969

Rifle SVD,Dragunov

M.G.-PKM

 7.62x54R-LPS 2850 869

Rifle SVD,Dragunov

M.G.-PKM

 7.62x54R-L/LPS/B-32 API  2850 869
Rifle AK-47,M,SKS 7.62x39mm-API 2400 732
Rifle AK-47,M,SKS 7.62x39mm-Ball/Steel Core 2400 732

 

WHICH PLATE SIZE IS RIGHT FOR ME?

Personal preference is the single most important determining factor when choosing the right size armor for any individual. The wearer must feel comfortable in whatever system and size they choose in order to maximize the effectiveness of any armor system. That having been said, the prior standard for all plates was 10”x12”. Military specifications now include a full range of sizes from Small to Extra Large, however size Medium, 9.5”x12.5” is considered the ideal fit for the 95th percentile, meaning that Medium is designed to fit 95% of all military personnel. 

In order to provide a more easily discernible size chart we focus on the height of an individual as the most important factor in determining proper fitment. See the outline below for a general height / plate size reference. Keep in mind, personal build, and personal preference are the most important factors.

If you purchase a set of plates that you feel is the wrong fit, call us for guidance and to get a quick and easy exchange.


SAPI Sizing Specifications

Size Dimensions Weight Height
Small 8.5”x11.5” 6.5 lbs <5’5”-5’8”
Medium 9.5”x12.50” 7.5 lbs 5‘8” - 6’
Large 10.25”x13.25” 8.5 lbs 6’1” - 6’4”
XL 11”x14” 9.75 lbs >6’4”


Swimmer Sizing Specifications

Size Dimensions Weight Height
Small 8”x10” 4.8 lbs <5’5”-5’8”
Medium 10”x12” 6.5 lbs

>5’8”

 

Weights and measurements are nominal 

 

Body Armor Swimmer Plates- Level IV (26225-26226)

$399.99 Save $-399.99
Two Swimmer Plates: NIJ Certified Level IV, Stand Alone (26225-26226) - Hoplite Armor Store
Two Swimmer Plates: NIJ Certified Level IV, Stand Alone (26225-26226) - Hoplite Armor Store
Two Swimmer Plates: NIJ Certified Level IV, Stand Alone (26225-26226) - Hoplite Armor Store
Two Swimmer Plates: NIJ Certified Level IV, Stand Alone (26225-26226) - Hoplite Armor Store
Two Swimmer Plates: NIJ Certified Level IV, Stand Alone (26225-26226) - Hoplite Armor Store
Two Swimmer Plates: NIJ Certified Level IV, Stand Alone (26225-26226) - Hoplite Armor Store

NIJ Certified Level IV Swimmer Plates (26625-26226) 

~SOLD IN PAIRS~

 

These are without question the best deal available for top quality body armor plates. The materials used in the fabrication of these plates allows for projectiles to be absorbed within the plate itself, preventing dangerous spall as is common with steel plates. Don't rely on your carrier to stop high speed bullet fragmentation.

Our 8x10 and 10×12 inch single-curve hard armor swimmer cut plate is certified NIJ 0101.05 Level IV Stand Alone. Manufactured from high-density alumina ceramic core (Al2O3) backed with layered polymer composite fiber.

All our Hard Armor Plates are Made in the USA by LTC, Leading Technology Composites, the worlds largest and most respected body armor manufacturer.

Specific weights and sizes are listed below. All figures are nominal. Some variation based on manufacturing tolerance may apply.  

Fits all standard carriers. 8x10 small carrier. 10x12 medium carrier.

Some popular items/sizes may incur a 4-8 week lead time. 

Specs:

  • Weight:  5.9 Lbs, 8.25 lbs
  • Thickness: .73"
  • Level: IV

 

Rounds Defeated: 

Weapon Ammunition  STRIKING
VELOCITY ft/s 		STRIKING
VELOCITY m/s
Rifle M-1 30.06 AP M2 2880 878
Rifle FN FAL 7.62x51mm - Ball/AP 2780 847
Rifle M-16/AR-15 5.56x45mm-M193/M855/ss109 3025 922

Rifle SVD,Dragunov

M.G.-PKM

 7.62x54R-L/LPS/B-32 API  2850 869
Rifle AK-47,M,SKS 7.62x39mm-API 2410 735
Rifle AK-47,M,SKS 7.62x39mm-Ball/Steel Core 2410 735

 

Sizes:

8" x 10"
10" x 12" 

Finished in Cordura Nylon Covering.

WHICH PLATE SIZE IS RIGHT FOR ME?

Personal preference is the single most important determining factor when choosing the right size armor for any individual. The wearer must feel comfortable in whatever system and size they choose in order to maximize the effectiveness of any armor system. That having been said, the prior standard for all plates was 10”x12”. Military specifications now include a full range of sizes from Small to Extra Large, however size Medium, 9.5”x12.5” is considered the ideal fit for the 95th percentile, meaning that Medium is designed to fit 95% of all military personnel. 

In order to provide a more easily discernible size chart we focus on the height of an individual as the most important factor in determining proper fitment. See the outline below for a general height / plate size reference. Keep in mind, personal build, and personal preference are the most important factors.

If you purchase a set of plates that you feel is the wrong fit, call us for guidance and to get a quick and easy exchange.

SAPI Sizing Specifications

Size Dimensions Weight Height
Small 8.5”x11.5” 6.5 lbs <5’5”-5’8”
Medium 9.5”x12.50” 7.5 lbs 5‘8” - 6’
Large 10.25”x13.25” 8.5 lbs 6’1” - 6’4”
XL 11”x14” 9.75 lbs >6’4”


Swimmer Sizing Specifications

Size Dimensions Weight Height
Small 8”x10” 4.8 lbs <5’5”-5’8”
Medium 10”x12” 6.5 lbs

>5’8”

 

Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded

$1,500.00 Save $-1,500.00
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded
Hoplite ACH Helmet Level III RIFLE RATED Fully Loaded

Hoplite ACH Level III Rifle Rated Helmet

 

Stop Rounds up to NATO M80 (7.62×51) round at 2100 ft/sec (640 m/s)

FULLY-LOADED HIGH-CUT NOMINAL WEIGHT
  • Medium 3.1 lbs. / 1.43 Kg;
  • Large 3.3 lbs. / 1.5 Kg;
  • X-Large 3.5 lbs. / 1.61 Kg 

Introducing the game changing AireLock Liner System.

The Pads-free AIRELOCK is a game changer in terms of user safety, comfort and ergonomics. With its all new quick-dial system, less than 50% of the liner touches the user’s head, creating a floating effect that delivers maximum comfort over extended periods of use.

The advanced silent dial system and premium chinstrap deliver a solution that is ideal for front line users. The AIRELOCK is the ultimate liner system for modern day operations. The AireLock Liner System is versatile and modular, and built to allow every user the ability to customize their own head protection configurations specific to their needs. 

FULL LEVEL III RIFLE RATED ACH

  • High Cut Shell
  • Velcro
  • Bungee
  • M-Lock Aire Rail System
  • Aire Mount NVG Shroud
  • Aire Support Prime Cushion System
  • Adjustable CAM Retention System

All Helmets Are Custom Made to Order

5 Week Estimated Lead Time 

RIFLE THREATS DEFEATED

Weapon Ammunition Velocity

 

5.56x45 M193 2,986 fps
7.62x39 M1943 2.676 fps
7.62x51 M80 Ball 2,100 fps


PISTOL THREATS DEFEATED

Weapon Ammunition 

STRIKING
VELOCITY

ft/s

STRIKING
VELOCITY

m/s
9mm 50-grain USM4 2490 759
9mm Fiocchi, 115-grain FMJ 1540 469
9mm 124-grain Hydra-Shok JHP 1230 375

9mm

 124-grain FMJ 1425 434
9mm 124-grain FMJ Steel 1262 385
.357 100-grain Frangible SF 1774 533
.357 115-grain JHP 1645 501
.357 125-grain SIG FMJ FN 1475 450
.357 125-grain GDHP 1454 443
.40-cal 95-grain S&W HP 1697 517
.40-cal 115-grain S&W JHP 1249 381
.40-cal 180-grain S&W JHP 1098 35
.44 Magnum 240-grain SJHP 1412 430

 

HOW TO FIT YOUR HELMET

Getting the right fit is important for performance and comfort. Use a tape measure and caliper to take measurements. The wearer MUST be seated in an upright position for proper fitting. See the illustrations for correct measuring points.

NOTE: If any measurement falls on the dividing line between sizes, select the larger size.

 

Small
UP TO 7¼" / 184 mm Length
UP TO 6½" / 162 mm Width
UP TO 21¼" / 538 mm Circumference
Medium
7¼" / 184 mm to 7¾" / 198 mm Length
UP TO 6½" / 162 mm Width
21¼" / 538 mm to 22½" / 573 mm Circumference
Large
7¾" / 198 mm to 8¼" / 210 mm Length
UP TO 6½" / 162 mm Width
22½" / 573 mm to 23½"/ 597 mm Circumference
Extra-Large
8¼" / 210 mm and over Length
6½" / 162 mm and over Width
23½"/ 597 mm and over Circumference

Hoplite Body Armor Mark II Carrier

$459.00 $395.00 Save $64.00
Hoplite Armor Mark II Carrier - Hoplite Armor Store
Hoplite Armor Mark II Carrier - Hoplite Armor Store
Hoplite Armor Mark II Carrier - Hoplite Armor Store
Hoplite Body Armor Mark II Carrier
Hoplite Body Armor Mark II Carrier
Hoplite Body Armor Mark II Carrier
Hoplite Body Armor Mark II Carrier
Hoplite Armor Mark II Carrier - Hoplite Armor Store
Hoplite Armor Mark II Carrier - Hoplite Armor Store
Hoplite Armor Mark II Carrier - Hoplite Armor Store
Hoplite Body Armor Mark II Carrier
Hoplite Body Armor Mark II Carrier
Hoplite Body Armor Mark II Carrier
Hoplite Body Armor Mark II Carrier

Hoplite Body Armor Mark II Carrier

 

Our Mark II carrier is designed to hold any size SAPI or Swimmer plates. Just match carrier size to your preferred plate size.

The 3 band MOLLE cummerbund is designed for minimal bulk and quick adjustment. Compatible with most industry standard placards and cummerbunds. Based on the most popular platform configuration. Designed specifically with the users needs in mind.

Add the Laser Cut Placard to attach MOLLE pouches to the front of the Mark II carrier. 

Ships VIA UPS Ground.

  • Dimensions: W:15" H:13.5" D:2"
  • Weight: 2 lbs, 9.91 oz

    Designed to hold Small, Medium or Large, SAPI or Swimmer Plates

    Includes Carrier Only. Accessories and Plates sold separately.

    Some popular items/sizes may incur a 4-8 week lead time. 

    Back to Quick Ship